PD-ventil

I machined a lot of the suspension to install it. It took a long time and was hard work, but I was very satisfied after installing this.Because the performance came out as I hoped.The motorcycle is stable and no longer bouncing off the bumps.

Select Lay Stick's product for high

But Valve's BODY is Material : It seems that Plastic is a little Large for my F Fork Spring diameter, and it was necessary to adjust and adjust the diameter with just a little file.

It is a product of some settings, but I have to take it out every time.
But motivation only problem.

Considering Material I think that it may be a little cheaper, but I am satisfied with the performance.
Even if the distance is overlapped, if there is no alarm in the resin, 5 points.

The postage on this item is way over the top being way too expensive at over 70$.. I have bought a lot of parts from your store and I feel that you are getting out of hand with your postage.. please revise the postage and I may buy more parts.. steve wardle vjmc of australia

Although it is not an impression, but the experience seems to be the same before at all Stee's Cartridge Imrulator, the experience of using this product The liver of this product gives the function of the plate Valve to the DamperROD formula Fork without plate Valve I think that. Even if the attenuation of the Fam of the DamperROD formula is good at the low speed side, it is raised etc.. On the high-speed side of Oil is gathered together at once, coming with a guts with symptoms like Oil lock for a moment. So I think that the purpose is to escape the Oil on the board Valve because movement is hindered. So, it seems that there is no point unless you do not have the function of compression side originally in DamperROD. Personally it is a product I would like to install in order to make the suspension move more than escape pressure in reverse rather than strengthen compression side decay. Is it possible to order the size of 118-4006 by saying? I am sorry that it is not an impression.

It is installed in KYB Φ 36 OEMFork of Z1000 mk 2 series.
In theory we tried to introduce with the idea that if the perfect setting can be made with this, it should become structurally superior with respect to the part of the attenuation pressure rather than VITO KYB and PMCKYB.

The disadvantage of the Large is that since SettingData does not exist much on the Web and there is no information that can be referred to, each person specifies the Spec. That it is in a state where you have to do your best on your own according to.

Personally, although Orifice processing of OEMDamperROD is recommended, it does not need it. (Since it thinks that it is hardly attenuated in any case)
I took off the top cap, pulled out of Spring, it was easy to wear it with Image like dropping with Poton from there, and it is easier to stick with Set.
I took a second step to purchase Replace's Fork, and I can not afford to pay for Small, but I think that it is Items of Recommendation for those who are interested in leisure and experimental efforts.

It is for those who can enjoy PRO settlement of set out and remodeling itself rather than to improve running.