Since it acts as Locke of the wiring unlike other electrotaps, involving in in two chip box, a motorcycle with much vibration can also be used in comfort.
Other electrotaps cannot be used any longer.

About quality and texture - The short circuit type electrotap x5 from SP Takegawa is made using molded plastic and a metal contactor, the quality from the overall fit and finish is perfect.About the feeling of use - A specialty part when adding electrical components that are not plug and play. These electrotaps make easy work of splicing into a wire without the need of making a cut and they clip securely together with no chance of coming loose from vibration generated from your motorcycle.Products to buy together - A key product to purchase when working on adding electrical components to your motorcycle, especially when needing to confirm single wires that you intend to tap into is a digital multimeter.Difficulty of installation - The installation of the electrotap is a simple task that took 0.1 of an hour to complete. No special tooling is required, you just place the wire you intend to tap into on the metal contactor and your wire that requires a connection into the metal contactor, then press the molded plastic together to complete the connection of the two wires.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the short circuit type electrotap x5 are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the electrotap, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The electrotap x5 from SP Takegawa is made using molded plastic and a metal contactor, the quality from the overall fit and finish is perfect.About the feeling of use - A specialty part when adding electrical components that are not plug and play. These electrotaps make easy work of splicing into a wire without the need of making a cut and they clip securely together with no chance of coming loose from vibration generated from your motorcycle.Products to buy together - A key product to purchase when working on adding electrical components to your motorcycle, especially when needing to confirm single wires that you intend to tap into is a digital multimeter.Difficulty of installation - The installation of the electrotap is an simple task that took 0.1 of an hour to complete. No special tooling is required, you just place the wire you intend to tap into on the metal contactor and your wire that requires a connection into the metal contactor, then press the molded plastic together to complete the connection of the two wires.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the electrotap x5 is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the electrotap, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture: I am happy with the quality of ring terminal lead from SP Takegawa made from a ring terminal, male bullet connector and small section of wireAbout the feeling of use: Makes connecting a ground to universal accessories like my temperature guage that is not Grom specific a breeze and there is no premanently cut wires if the accessory is removed in the future.Products to buy together: An electro tap would also be desirable to purchase along side the ring terminal lead so that a power can be provided to the accessory via the motorcycles wiring harness.Difficulty of installation: The process to install takes about 5 minutes, the accessory will need a female bullet connector fitted and simply connect the bullet connectors and bolt the ring terminal down onto a section of the Grom's frame that is free from paint for a good connection. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting two leads complete with connectors to save you the time preparing these yourself as compared to purchasing all the items individually which will be cheaper if you need numerous leads.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: This is a relatively short lead and if you are needing different lengths search grounding cable for many more options.View Detail

About quality and texture: I am happy with the quality of the electro tap from SP Takegawa that is made from a insulted plastic housing with a conductive metal strip on the inside.About the feeling of use: Makes connecting power to universal accessories like my temperature guage that is not Grom specific a breeze and there is no premanently cut wires if the accessory isremoved in the future.Products to buy together: A ring terminal would also be desirable to purchase along side the electro tap so that a ground can be provided to the accessory via a point from the Grom's frame.Difficulty of installation: Installation requires accessing the wire you wish to tap a signal from and placing that wire and your accessory's wire into the electro tap, press down firmly on the metal strip for it to make contact between the two wires and then close the plastic clip to secure the connection. The process to install takes about 10 minutes. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting five electrotaps for the purchase price which makes them the best value per item for purchasing a small quantity but if you need 50 then Clever Lights product is better for you.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: I great and easy way to connect to you motorcycles electrical harness. If you are unsure of how they work from my description then checkout a video online before you make the purchase.View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail