3,492.38 SEK
(49,700 JPY)
2,643.53 SEK
(37,620 JPY)
(24% REA)
5 (5 alla recensioner)
Excellent
As compared with the former MODEL, it is very easy-to-use.
-- a cheap tool -- since [, such as a system, ] it is high --
with few Crimp mistakes -- since there is a Repair parts finely, it is found useful.Although
> DIY can be carried oAs compared with the former MODEL, it is very easy-to-use.
-- a cheap tool -- since [, such as a system, ] it is high --
with few Crimp mistakes -- since there is a Repair parts finely, it is found useful.Although
> DIY can be carried out, origin is not taken by one Motorcycle (being too expensive).
Reviews For KTC Drive Chain Tool Set From Other Webike User
Very Good
I feel the threshold is not beginner friendly w Is it a tool for PRO?[How is it used?
Currently in use, rarely used since it only comes into play when Chain is exchanged.
Was the one you received as per Image?
Image is correct. It has a sense of quality and rigidity.
How was your experience with it?
The Grip is easy to hold, the movement of the Outer and InnerBolt is smooth, there is no stress, and the accuracy is high.
Various Product Contents are made into attachments in order to be used for Chain size correspondence, Cut, and Crimp, and it is easy to use the point that the O-ring is attached to the attachment and the dropout prevention measure is given. Moreover, it is devised in the shape that can be checked so that it may not be tightened too much in the press fitting of the joint plate.
When crimping the Link Plate, there is no need to prepare any other tools by using the attached Handlebar, and I like the fact that it suppresses the input of an overly large Torque. This is an excellent tool that has a lot of ingenuity and can cut and crimp reliably.
There are some disappointing points such as the price, the surface coating peels off on the powder and sticks to your hand when you use it for the first time, the instruction manual does not specify the amount of crimp, and only the illustration of the crimp shape and notes are written.
[Points to note]
If you are not sure how much to crimp, we recommend you to check the specified value of ChainManufacturer.
The instruction manual instructed to use 52 press-fit plates for 525 size, but I used 50 press-fit plates (530 size) because I could not use them with DID 525ZVM-X which I replaced this time.
How did it compare to other products?
We compared the DID Chain tool, which has a low price and a good reputation, but we chose a reliable and first-class tool manufacturer because of its ease of use and the fact that the chain is an important security component.
Other items that would be helpful
Opinions and requests to Manufacturer:I would like to see the Crimp amount (diameter) for each Chain size listed in the Instruction Manual or on the web.View Detail
Excellent
This is superbRepair Parts of the previous MODEL will not appear and it is a substitute.
First of all, it is overwhelmingly different that Plate's press-fitting has become easier.
Former MODEL was difficult because Plate was easy to fall, but the fall with Z guide. Also devised to prevent excessive press fitting.
CutPin which was heavily damaged in the previous MODEL has been changed from the Screw expression to the insertion formula, and the Trouble that breaks from the root is gone.
Crimp pin also changes to a special shape thing, it is devised that it is not too much Crimp.
Anyway it's easy to use. Super Recommendation.
But Neck is price.
Although I am frequently used, there is no problem, but the general one is too expensive to buy.
I would like to lower the price as much as possible, apart from 60 series Parts.View Detail
Most Viewed Reviews Of KTC Chains
Very Good
I feel the threshold is not beginner friendly w Is it a tool for PRO?[How is it used?
Currently in use, rarely used since it only comes into play when Chain is exchanged.
Was the one you received as per Image?
Image is correct. It has a sense of quality and rigidity.
How was your experience with it?
The Grip is easy to hold, the movement of the Outer and InnerBolt is smooth, there is no stress, and the accuracy is high.
Various Product Contents are made into attachments in order to be used for Chain size correspondence, Cut, and Crimp, and it is easy to use the point that the O-ring is attached to the attachment and the dropout prevention measure is given. Moreover, it is devised in the shape that can be checked so that it may not be tightened too much in the press fitting of the joint plate.
When crimping the Link Plate, there is no need to prepare any other tools by using the attached Handlebar, and I like the fact that it suppresses the input of an overly large Torque. This is an excellent tool that has a lot of ingenuity and can cut and crimp reliably.
There are some disappointing points such as the price, the surface coating peels off on the powder and sticks to your hand when you use it for the first time, the instruction manual does not specify the amount of crimp, and only the illustration of the crimp shape and notes are written.
[Points to note]
If you are not sure how much to crimp, we recommend you to check the specified value of ChainManufacturer.
The instruction manual instructed to use 52 press-fit plates for 525 size, but I used 50 press-fit plates (530 size) because I could not use them with DID 525ZVM-X which I replaced this time.
How did it compare to other products?
We compared the DID Chain tool, which has a low price and a good reputation, but we chose a reliable and first-class tool manufacturer because of its ease of use and the fact that the chain is an important security component.
Other items that would be helpful
Opinions and requests to Manufacturer:I would like to see the Crimp amount (diameter) for each Chain size listed in the Instruction Manual or on the web.View Detail
Excellent
This is superbRepair Parts of the previous MODEL will not appear and it is a substitute.
First of all, it is overwhelmingly different that Plate's press-fitting has become easier.
Former MODEL was difficult because Plate was easy to fall, but the fall with Z guide. Also devised to prevent excessive press fitting.
CutPin which was heavily damaged in the previous MODEL has been changed from the Screw expression to the insertion formula, and the Trouble that breaks from the root is gone.
Crimp pin also changes to a special shape thing, it is devised that it is not too much Crimp.
Anyway it's easy to use. Super Recommendation.
But Neck is price.
Although I am frequently used, there is no problem, but the general one is too expensive to buy.
I would like to lower the price as much as possible, apart from 60 series Parts.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING