96.97 SEK
(1,380 JPY)
92.76 SEK
(1,320 JPY)
(4% REA)
5 (1 alla recensioner)
Passar:
HONDA CB400FOUR (air-cooled) 75-77 398cc, HONDA CB400FOUR (air-cooled) 75-77 408cc, HONDA CB400FOUR (air-cooled) 75-77 Reverse 398cc, HONDA CB400FOUR (air-cooled) 75-77 reversible 408cc, HONDA CB350 72-74 Reversed wheel
View more
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Blue Spring Memories CB250EXI had a CB250EX when I was in my 20s, but after 40 years, I got nostalgic and kept looking for a good one I finally got my hands on this 1972 model
"MissionReturn spring needs to be replaced I got it knowingly, knowing that this was the explanation in advance However, this Spring has already been discontinued I managed to get the unused Spring stock at Oakshon overseas I removed the Clutch and opened the Right Crankcase Cover to replace the spring stock I had planned to have to, but the GEAR of Clutch outer and The GEAR on the Crankshaft side is a double layered GEAR with a gap of one tooth on both sides The Crankshaft side GEAR has the structure that the Oil Filter is integrated into the Crankshaft side GEAR In order to pull out the Clutch outer, the Oil Filter must be removed Remove the RotorCap and remove the RotorCap It is fastened with a Lock washer There are traces of it being opened before, and there are also dents from removing the lock nut with Graver at that time There is a large slotted screwdriver instead of a Graver Large slotted screwdriver is used instead of Graver according to its precedent Loosen the lock nut to the lock nut, remove the Oil Filter and Clutch, and aim "MissionReturn spring Finally, we meet at the I was able to replace it safely The last issue is the lock nut with the Graver mark on it I want to assemble a new Nut with tools, and although it is possible to get both Nut and Washer respectively, my problem is that they are not available Mr. We-Big! What a Quantity:Set Lock nut& for BRCClutch center; Lock washer It's available as a Moreover, it is cheap at 1057 yen The shipping cost is 380 yen all over the country, but this product is 250 yen because it is Small object of delivery, and the total cost is 1,000 yen I snapped it up for 307 yen and took the opportunity to clean the ClutchFilter and While making your own Crank Case CoverPacking from Packing Paper And wait for it to arrive Tightening it with Graver again is a bit of a trick, so I machined a 22mm SocketPiece Special tool for lock nut? I also made my own A few days later, Nut and Washer arrived earlier than I expected I installed Crank Case Cover Turned the oil and started the Engine Outlook Blue Spring Memories CB250EX has been revived
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING