1,616.19 SEK
(23,000 JPY)
4 (6 alla recensioner)
Very Good
You'll get used to it.Used on MT09, easy to use once you get the hang of it, but the price tag is too high. 10,000 or less is appropriate.
Reviews For World Walk Motorcykelmäklare From Other Webike User
Very Good
Does it take some getting used to?The product is solidly built and lifts on Lever's principle
Pushing is Large sturdy, but I think it takes a little bit of getting used to pulling it forward
Our Garage is a little bit uncomfortable because the concrete of the floor is devoid of Decoration I guess
In the case of a large motorcycle, the Mover is also used under the Side Stand Quantity:The Set one might have been better
Anyway, I was satisfied because I didn't have to move the Side Stand while rubbing it forcefully anymore I am
View Detail
Excellent
It is easy to move your MotorcycleUsed in Z900RS
When we used to put the motorcycles in the shed, we had to switch them over and over again to get them in there But it is heavy and when I did it while being careful not to hit it, I got sweaty and my muscles ached I bought this product to see if it was possible to shift the rear wheel easily When I used it, I found that I could easily push and pull the rear wheel by Lever's principle It is now a necessity for getting the motorcycle in and out of the carView Detail
Very Good
This is convenientMovement in a narrow storage is impossible without this.
I was surprised to be able to easily move it.
I put a file and cleaned the corner I was interested in.
If the price goes down to 10,000 yen, I think that the evaluation can be full marks.View Detail
Very Good
You can move easily.I thought that there was also the effect of crime prevention I bought it to put 2 Motorcycle in the back of my home Garage.
I could relax and sort out on the wall easily. Although the pull needs a little hang, it does not matter if you get used to it.
Afterwards I think that the price is a little cheaper and still better.View Detail
Most Viewed Reviews Of World Walk Other Maintenance Stands
Excellent
revelationLarge is useful for narrow garages. Women need a little practice when starting to use it. It is recommended to use it after practicing in a wide space.View Detail
Very Good
Very convenient, but also requires cautionWith the Motorcycle Mover, I can easily pull my 250kg lighter machine up against the garage wall. I don't have to push and pull the machine over and over again, which saves me a lot of time and effort.
The product is well built, rigid, and beautifully finished with a high quality feel.
However, there are some points to note.
The Motorcycle stand may be paid off while the Motorcycle is being moved in conjunction with Stand Mover.
Relying too much on Stand Mover can be dangerous, and I almost knocked over a Motorcycle once.
This can be prevented by installing the Stand Mover with awareness of its orientation and moving the Motorcycle slightly upright.
Because we are moving heavy objects, there is a certain amount of danger involved. We always try to handle them with care.View Detail
Very Good
It's expensive, but nothing else will change that.The price is quite distressing before purchasing, but if it can be moved freely, it will be easy to move in and out of Garage, and even increasing the number of cars is not a dream.
With this New Model, both the front and rear wheels can be moved, allowing for effective use of space.
I saw some reviews on the old one that it still had the Edge, but I guess it's good that it's made in Taiwan? There is no Edge and there seems to be no worry about scratching Boots.
I'm not sure about Merit, which increased the number of Bearings on Motorcycle Mover to three, because it allows you to move without grounding the Bearing under your feet when pushing and pulling. I think it is suitable for those who want to stabilize the bike and step on it as hard as possible, but for me, it is useless because it increases the resistance to ground contact.
I tried to move GSX1100SKATANA which is the heaviest body to move The Motorcycle Mover did not flex, and I could feel a sense of its solid strength, which was reassuring.
Subtle is the Stand Mover.
When using the Motorcycle Mover, the front or rear wheel is used as a branch in a circular arc, so the bearing of the Stand Mover is designed to roll in a slight arc.
It is good if you work from the Side Stand side, because you can push and pull it while checking, but from the Right Side where you can't see the Side Stand, you can't slide off the Stand. I am afraid that it will come off and I will fall off.
As a countermeasure, since the board is reasonably thick, I am thinking of making a tap, making a rip with AluminumAngle, and attaching it with Butterfly Screw. If you want the best, it would be better to laser-cut the plate into the shape of STAND and sew it (you need to know an ironworker who has a laser cutting machine to do this...).
A clean floor surface is a prerequisite for installing Motorcycle Mover. My garage is an office that originally had Linoleum flooring, so the concrete is rough and the rolling resistance is large. (I feel like putting a steel plate on it.)
I would like to ask WorldWalk to sell the Stand MoverSingle Body, because to pack the Motorcycle, you have to push it towards the Left Side, but it is difficult to retrieve the Stand Mover. I hope you can make this happen soon because I would like to have two more cars.View Detail
Excellent
SatisfiedI bought it because I moved to a new house and my parking space was getting smaller. I use it on my ZEPHYR750. I use it on my ZEPHYR750 and recommend it to short women who are not strong to practice many times to get the hang of it.View Detail
Average
It's so much easier.The turnaround in my small home parking space is now 1/1th the size of a parking space. We have a W800 and it travels lightly.
However, it was improved and GizaGiza seems to have increased, but there are many things that do not escape from Tire, so we decided to use Minus.
Am I doing something wrong?View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING