?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.
CBR650R with NISSIN radipon & phi;17?
Here are some impressions from my usual test run at Doshi.View Detail
[How is it used?
Touring to Winding
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Improved Control
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
I installed it on my old car with weak brake along with Mesh hose, I did not change Pad and Caliper.
The total braking force is the same, but the force is transmitted more reliably, so the brake can be operated more precisely.
Furthermore, because the position of Brake can be set finely, it is considerably helpful for the person whose hand is a little Small. The Style of the old car collapses, but a good thing is good.
It takes some hang to get the air out, but I was able to get by with just the Syringe.
It may be inferior to the expensive MASTER of brembo etc., but the durability and performance are ◎ in total.View Detail
I attached it to MT - 07.
NORMAL → Yamaha Brembo 16 φ → Herring 17 Φ.
I felt the hand grip is Large on 16φ
I was chic at this time with this item.
Quantity : I think that it is Recommendation for 2 pc multiplier.
View Detail
To be honest, I wanted to make it separate MASTER in the sense of appearance Tune, I made it Radial at the same time, but Touch's Fee Ring is completely different!
"Gatsun!" At the moment of grasping is gone, smooth Ring is Fing.
I highly recommend it..View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
[How is it used?
I installed this on my MT-09 2017 model. 41Φ.
Change Spring in Front fork to Hyper pro and use it to visualize the amount of Stroke.
Was the one you received as per Image?
As per Image.
How was your experience with it?
Tie Wrap can also measure the amount of Stroke, but it is a self-satisfying addition of a component.
No particular complaints.
[Points to note]
As others have mentioned, installation is a bit tricky. Instead of installing it out of the blue.
I think it is better to practice only Spring to make a loop in the air.
For installation, only the Spring is wrapped around the Inner Tube, and then the Rubber Band is attached to the Slider.
We did it with the feeling of
How did it compare to other products?
There were cheaper ones than this item, but we chose this one because of the shipping cost.
I cannot tell the difference in performance and quality.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING