I needed to piece together all the parts for the original tool kit for the used Grom I purchased

reasonable price this genuine product ...i cant found this in my country ...finally i bought Puller, Mini Fuse Sumitomo from webike..Thank you webike..highly RecommendView Detail

I am happy to work with the webike team.Actually this item i could not found in my country (Bolt，BreakOff 90107KBW900). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended.View Detail

The tools kit of my old Honda VFR 800 VTEC was lost, I ordered new a spanner pin to adjust the chain after two thousand km. The new spanner pin fit and easy to use.View Detail

About quality and texture: I am happy with the quality of the headlight cover from Honda. Made from ABS plastic and finished in the Ross White paint colour.About the feeling of use: Perfect replacement part from Honda with a quality fit and finish you would expect when you need to replace damaged parts. Products to buy together: The fuel tank center cover is another high wear item due to the positioning on the Grom that also needed replacing to freshen up things. Difficulty of installation: The process to install takes about 30 minutes, remove the 4 allen key fasteners on the side to release the headlight assembly and then disconnect the 2 electrical connectors for removal. Remove the side covers and now you have access to replace the headlight cover. Reverse then process to complete the installation. Not difficult to do. Cost performance and comparison with other products: High cost for the Ross White headlight cover when compared to other replacement headlight cover colours available like the Mat Silver.About shipping and packaging: a freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs and to assist the Ross White colour code is NH196.View Detail

About quality and texture - Good quality, just a basic material tool bag for the OEM tools.About the feeling of use - It does the job keeping the OEM tools secure in the side cover.Products to buy together - The tool band that secures this bag to a cover in the side cover, product # 89012-KZL-930.Difficulty of installation - Easy to install the tool bag into the side cover if you have press screws and tool band available, 5 minutes and you will be done.Cost performance and comparison with other products - Very well price repair item when your original tool bag breaks down, direct no aftermarket options out there right now.About shipping and packaging - No delay on shipping and arrived on time as advertised. OEM packaging and arrived without issue.Any concerns, cautions, or advice when purchasing - If you want a longer lasting material tool bag you may want to source a local tailor.View Detail

About quality and texture - The front master cylinder diaphragm plate from Honda is made using plastic, the quality from the overall fit and finish is perfect. About the feeling of use - One of the parts that deteriorates over time but is cheap and easy to replace when performing your brake fluid servicing. Products to buy together - Key products to purchase when carrying out servicing on my motorcycle would be crush washers, gaskets, spark plugs and the like as these products are cheap and convenient to have on hand. Difficulty of installation - The installation of the front master cylinder diaphragm plate is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is what is required to place the diaphragm plate on top of the master cylinder. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the front master cylinder diaphragm plate is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the front master cylinder diaphragm plate, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The front master cylinder diaphragm from Honda is made using natural rubber, the quality from the overall fit and finish is perfect.About the feeling of use - One of the parts that deteriorates over time but is cheap and easy to replace when performing your brake fluid servicing.Products to buy together - Key products to purchase when carrying out servicing on my motorcycle would be crush washers, gaskets, spark plugs and the like as these products are cheap and convenient to have on hand.Difficulty of installation - The installation of the front master cylinder diaphragm is a simple task that took 0.1 of an hour to complete. Common sense and just the use of basic hand tools is what is required to place the diaphragm into the master cylinder. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the front master cylinder diaphragm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the front master cylinder diaphragm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it's all about the look for me.Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts.Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but that is not the case with their rear rack.About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available.View Detail

About quality and texture - The 372cc oil catch tank from SP Takegawa is made from aluminium with neat aluminium TIG welds and a polished surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The 372cc oil catch tank has resolved my engine oil loss caused from high RPM riding by capturing the oil vapour generated during this period of riding and re-directing it back to the crankcase via the larger 12mm barbed hose fitting.Products to buy together - A key product to buy together with the 372cc oil catch tank is the oil filler breather cap that will allow for the connection of the oil catch tank to the engine for an engine oil return path.Difficulty of installation - The installation of the 372cc oil catch tank is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is what is required to mount the oil catch tank to an available frame tab, in an open and elevated position.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 372cc oil catch tank is no different. The design of this 372cc oil catch tank with it's fivepossible barbed hose fittings is what sets it apart from the others.About shipping and packaging - With there being no cost difference between sea freight and EMS for the 372cc oil catch tank, I choose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited.View Detail

About quality and texture - The front fork springs from Kitaco are made from steel with a raw surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - These heavier front fork springs would have to be the best value component to improve handling. 5.5Nm up to 85Kg, 6.0Nm 85-100Kg, 6.5Nm 100-110Kg and 7.0Nm 120Kg+. Products to buy together - A key product to purchase when you are out to improve the handling on your Grom is a rear shock absorber with a heavier spring and adjustability. Difficulty of installation - The installation of the front fork springs is an intermediate task that took 3.0 hour to complete. Some mechanical aptitude, the use of a special tool and basic hand tools is what is required to remove the fork legs and access the internals.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the front fork springs are no different.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the front fork springs, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail