This GSX650F came in for a service which included air filter, oil filter and oil change. I decided to go for the K&N filter over the OEM one because you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Suzuki one which came on the bike when the customer dropped it off. By the looks of it, it has rarely been changed. I dispair how some people manage to run bikes without the slightest notion of maintenance. Finding the correct filter for this bike was easy too, I checked on Webike website and this showed the models that fit each filter. Really easy. I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in or out. The filter arrived in perfect condition and did come pre-oiled which is also nice so you do not have to mess around the first time. Fitted in about half an hour total. The final result was perfect. A nice clean well oiled air filter ready for a few thousand miles to come. Thanks to Webike for doing a great job and providing a great service throughout. View Detail

We wanted to try the new K&N filter for this bike over the OEM one becasue you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Suzuki one which came on the bike standard. Finding the correct filter for the bike was easy too, I checked on Webike website and this showed the models that fit each filter. Super easy.I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days but there was a weekend inbetween. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in out. The filter arrived in perfect condition and fitted as I mentioned above in about half an hour total and that was including cleaning the surfaces and prepping everything. The final result was great, all sorted and no leaks. If you do it right the first time, follow the instructions this won't happen anyway. Very pleased with my order, a big thanks to Webike for doing a great job and providing a great service throughout.View Detail

For the high performance and upgrade the air flow with an afternarket exhaust system i choose this one as the best brand in this segment, fitted on my 2019 Honda CB1100RS like the genuine one and make the flow and response better, ofcourse beside the best price and trusty service from webike japanView Detail

Install K&N replacement air filter on my bike. Its provide better air flow and washable. In long run, save money than keep replacing stock air filter. Highly recommend to others, especially if you want to change to full exhaust system. View Detail

I do love a good day of maintenance. This time it was for a lovely CBR1000RR. Full on oil filter, oil and air filter change. We wanted to fit the K&N filter over the OEM one becasue you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Honda one which came on the bike standard. Finding the correct filter for the bike was easy too, I checked on Webike website and this showed the models that fit each filter. Super easy.I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days but there was a weekend inbetween. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in out. The filter arrived in perfect condition and fitted as I mentioned above in about half an hour total and that was including cleaning the surfaces and prepping everything. The final result was great, all sorted and no leaks. If you do it right the first time, follow the instructions this won't happen anyway. Very pleased with my order, a big thanks to Webike for doing a great job and providing a great service throughout.View Detail

About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it'd all about the look for me.Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts.Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and their rear rack is no different.About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available.View Detail

About quality and texture - The clutch outer from Honda is made from aluminium casting and steel machining that are secured together, the quality from the overall fit and finish is perfect.About the feeling of use - I was having issues easily finding neutral and replacing this part solved the problem. The cause was the grooves that wear into the aluminium between the fingers where the clutch disks lay.Products to buy together - A key product to buy together with the clutch outer for me was new clutch disks, there are many options available but I thought the reinforced 6 clutch disk kit Kitaco sell was ideal for my engine setup and it has also replaced other worn aluminium parts in the clutch mechanism.Difficulty of installation - The installation of the clutch outer is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch outer to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but this is not the case with the clutch outer as the pricing seems excessive.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the clutch outer, I chose sea freight to save some money as the part was not required immediately. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The left cylinder head cover from Honda is made from cast aluminium and a black painted surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The finned design of the left cylinder head cover from the Grom is preferred over the flat design of the left cylinder head cover from the Monkey 125 and the colour change gives the engine some character.Products to buy together - More black parts from the Grom engine like the timing cover and crank cover for the left side of the engine and the clutch cover protector for the right side of the engine would be key products to buy together with the left cylinder head cover to balance the colour change.Difficulty of installation - The installation of the left cylinder head cover is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the cover to the cylinder head after transferring over the O-ring. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the left cylinder head cover is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left cylinder head cover, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The exhaust system gasket from Honda is made from a high temperature metal graphite, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable exhaust leak from the old gasket but since the exhaust system had been installed and removed a few times I thought it best to replace the gasket this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil spinner and filter screen.Difficulty of installation - The installation of the exhaust system gasket is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the gasket into the exhaust port in the cylinder head.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the exhaust system gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the exhaust system gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The cam chain guide roller from Honda is made from a hard rubber bonded onto a steel center, the quality from the overall fit and finish is perfect.About the feeling of use - The cam chain guide roller is a solid little part that constantly cops a beating from the cam chain and it's tension. It's worth your while having an inspection every now and then and keeping an eye out for pieces of rubber in the filter.Products to buy together - Parts within the cam chain tensioner system suffer significant wear with engine upgrades that allow for much higher RPM riding and a key product to buy together with the cam chain guide roller is the cam chain tensioner push rod head.Difficulty of installation - The installation of the cam chain guide roller is an advanced task that took 1 hour to complete due to the disassembly of the engine required to access the area in which the guide roller is installed. Mechanical aptitude and the use of a special tool and basic hand tools is what is required to secure the guide roller to the engine case.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the cam chain guide roller is no differentAbout shipping and packaging - With there being no cost difference between sea freight and EMS for the cam chain guide roller, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricingView Detail