4,216.16 SEK
(60,000 JPY)
4,083.42~ SEK
(58,111 JPY)
(3% REA)
4 (1 alla recensioner)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
1 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Very Good
Great productNeck protection is a must. Expensive, I wish it was a little cheaper. But I can't trust a cheap product. It is worth my safety and health. Leatt is light and comfortable.Leatt is light and comfortable.worked perfect with my Leatt chest protector. Didn't even notice i was wearing it while riding.
Most Viewed Reviews Of LEATT BRACE Neck Brace
Excellent
Expensive but purchased before Large injury[How is it used?
I wear it to reduce the damage to my neck when I fall down during off-road driving.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is convenient to attach and detach while wearing Helmet or Chest Protector.
It is so light that you forget you are wearing it.
I am a skinny girl, so I was worried about the fit, but the adjustable range was wide enough to make it fit me perfectly.
I was most concerned about the Helmet's movement when running, especially if it would restrict the angle of upward movement, but I had no problem when using it with the LEATT (Leatt) Chest Protector.
When you take on a long uphill climb such as the Enduro, you are looking up from the bottom of the hill, right? I was happy to be able to look up at that point.
I don't know about the effectiveness of this product in the event of an actual fall. I pray that the day will never come when we will know the effectiveness of this product. I thought it would be cheaper than receiving a LargeDamage to the neck, so I gave it a Cost performance of 5*.
[Points to note]
It is better to use it with a LEATT (Leatt) Body system Protector that is compatible with LEATT (Leatt) Neck brace. We do not know the compatibility with Protector of other companies.
Neck braces are very expensive, and it is best to use the same Manufacturer as the Body protector and check the fit before purchasing.
Size, but the chest thickness can be adjusted by about 2 cm, so I bought it according to the product information to fit my chest circumference and it was Large sturdy.
[Body-based Protector that I use in conjunction with
LEATT BRACE:22MODEL AIRFLEX Chest Protector
https://imp.webike.net/article/551207/
How did it compare to other products?
I had previously purchased a Neck Protector from another company, Universal Product, and was horrified to find that it restricted the movement of the Helmet by a LARGE amount. I quit using it in an instant.View Detail
Excellent
Safety.[How is it used?
I started Enduro race last year, and I had already prepared all the usual equipment to ensure safety, but I finally bought a neck brace, which I had hesitated to buy because of its high price, as a last resort.
Although it is highly used in MX, more and more people are using it in Enduro race recently, and although not as much as in MX, Enduro also has a good Speed, so the sense of security is quite high. Enduro is not as fast as MX, but it also has a good speed, so there is a sense of security.
At first I thought it would be uncomfortable around my neck, but after using it, it doesn't bother me much.
It comes with a Belt to hold it in place, but I don't use it, and I bought it with the Neck brace. Leatt brace AIRFLEX Chest Protector
https://www.webike.net/sd/24843811/
The Hook is used to fix the camera to the camera, and when used with the Hook, the camera is also fixed and does not feel uncomfortable.
Neck brace has to be compatible with Chest, but since it is the same Leatt brace, it is also a perfect match.View Detail
Excellent
It is RepeatI bought the Repeat because the same MODEL I bought before was damaged.
My chest circumference is 94cm and it's just the Size switching Line, but I choose S/M Size.
The width of the front and rear adjustment is two steps, but the narrower one in the state of the Inner type Protector and the light armor, the narrower one in the state of the inner type Protector.
When it's cold and you're wearing a jacket over it, it's best to wear it wide.
If you consider the thick protector of OuterType, jacket layering, etc., I think L/Size XL is also good.
I've used another company's MODEL (Omega) before and was thrown out of the Motorcycle and fell on my head.
The Helmet was damaged in that case, but there was no particular abnormality in the cervical spine, and I realized the importance of this.
However, in the case of Omega, there is the fact that the compatibility with Chest Protector is bad and the distributor at that time quit dealing with it.
I switched to this Leatt3.5.
Not that I was particularly thrown off or tumbled this time.
One thing that comes to mind is that I've fallen and crashed into a standing tree many times when attacking in the mountains.
It is likely to have been damaged by Timing somewhere in there.
In other words, it protected me from the impact without causing any abnormality to my body.
That's why I bought Repeat again this time, but in 2021MODEL, I evolved a lot.
I put it up in the picture.
(1) The part that rides on the shoulder becomes thin, and the neck is Quantity:Pair (for Left and Right) It is now easier to move it to
(2) The part where the foamed styrene was partially exposed became full mold, and the durability and maintainability were improved.
(3) The back pillar is thinner and partially notched, making it more flexible than the previous model.
There may be others, but I noticed the above three points at a quick glance.
It's a safety feature, so it's good to see that they're making modest improvements to this part of the car.
If it ever breaks again, I would buy Leatt.View Detail
Very Good
As preparation for fallenBecause I can not say that I will not fall absolutely, buy it to reduce Damage. Although it is reasonable to use, insurance, although the amount of money is high, it was not possible to handle it as soon as buying. Those who are planning to buy from now will find compatibility with Body protector, and wearing Jacket to check Size properly.
View Detail
Other Reviews From NO NAME
Very Good
Priced right and no damage to the adjuster.Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View Detail
Very Good
Great safety and looks productnice and shiny replacement for the old tattered cloth renthal pad i had for years.Pad fits well on ktm. I don't love the graphics but needed it to replace the one on the bike that was falling apart. Pretty stiff foam too. I'm not sure I want my face to hit it.I wanted to buy an original product instead of a poor quality fake.Price seems high for what it is.View Detail
Very Good
Great product, great upgradeMalfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100km\h made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected.View Detail
Very Good
A must have tool for any tool box.This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING