Ignition Coil Assy

After a hard knock whilst on the track, the sub lead became damaged and caused a few issues with the bike. Obviously, with this lead damaged, it meant a lot of the electronics also failed so this needed replacing asap. I found the right part for this model by using Yamaha schematics and the Electrical 1 section. Pretty easy really. The cost that Webike had this for on site was far better value than I could source locally. The shipping method I choose is EMS as they just get the orders delivered fast. I get full tracking every step of the way too so I can gauge when the order will arrive with me. Anyway, the wire sub lead arrived and was well packaged. The Yamaha frosted packet it came in was well protected from any damage too. The sub lead is nothing really exciting to look at. It is literally a wire lead with a connector on each end. You cannot get the ends mixed up as there is a large rubberised cover on one end which goes on the bottom. All I can really say about he quality is, it worked perfectly so the quality is excellent. All the errors disappeared and everything now works as it should when the bike is started. Very pleased with this purchase. Webike, you are the greatest. View Detail

This bike had intermittent starting issues and it was discovered that the main ignition coil on number 2 cylinder was at fault. Not really a part you want to be swapping for a cheap after market one. On the safer side to just buy genuine Yamaha at this point. I was pleasantly surprised that this ignition coil was available to buy but luckily, Webike could order me one. The price was really good for a genuine ignition coil too. These do tend to be on the more expensive side anyway. I had this shipped fast using EMS and in as little as 5 days, my order arrived. The ignition coil came in the Yamaha packaging and was very well wrapped to keep it safe from any damage. Not really much you can see of the part that really matters but the resistance was within specifications and was how it was supposed to be. The quality of the outer is very good and there were no sharp edges on the ignition coil to catch you out on installing. The top rubber boot is flexible and slips on easy enough, just make sure to press home firmly. Not a hard job to fit but you need to make sure not to stress the connectors in any way or you might as well just buy another one. I found this out the hard way a long time ago. Anyway, job complete, ignition is now fully functional and no issues. Thanks Webike. View Detail

This bike came in for a service and to prepare for the annual MOT, the rear reflector was missing and had no doubt fallen off so this needed replacing. Finding the right one for this bike was not so difficult as I used the Yamaha schematics for this. After I found it I searched Webike and the part was available in the other warehouse. Not an issue as I did not mind waiting for it as we had time. Anyway, the order was placed along with a few other small parts. I used EMS and the order was delivered in a week. All the parts were well packaged and there was no damage. The reflector is the perfect shape for this model and keeps with the overall look. The reflector itself is well made and is very reflective when hit with a torch beam. Fitting was straight forward and this just bolts on with the rear threaded section with a nut. Job finished and the bike will now pass the MOT and have no worries going forward. Thanks Webike,, very happy customer View Detail

The owner of this bike came in and asked for it to be cleaned up with new parts as they were wanting it back to original factory state. There were areas that were ok but did look a little tired for such a young bike. This bike did a lot of miles though and started to show badly. I did need a lot of parts for this XSR700 and to make is as it was when it rolled off the factory line, one was for the reflector brackets. Not really something I would replace but this is not my bike after all. I found the right brackets for this work pretty easily, this bracket is actually one of 2, Reflector bracket number 1. After finding the right parts I checked Webike and the price was really great value and far better than my local Yamaha dealer could beat or even match. I ordered at the same time reflector bracket number 1 too so they would both arrive at the same time. In just 5 days, EMS had my order delivered. All the parts were expertly packaged and the brackets were well wrapped. This reflector bracket 1, came in the standard Yamaha packaging wrapper. The quality is really great as you can see from the correct bends in the metal and the finish which is a lovely standard Yamaha satin black paint. I was really happy with how this bracket and bracket 2 came together and did not need any external force to get them to meet. Very pleased with this purchase, Thanks Webike View Detail

The owner of this bike came in and asked for it to be cleaned up with new parts as they were wanting it back to original factory state. There were areas that were ok but did look a little tired for such a young bike. This bike did a lot of miles though and started to show badly. I did need a lot of parts for this XSR700 and to make is as it was when it rolled off the factory line, one was for the reflector brackets. Not really something I would replace but this is not my bike after all. I found the right brackets for this work pretty easily, this bracket is actually one of 2, Reflector bracket number 2. After finding the right parts I checked Webike and the price was really great value and far better than my local Yamaha dealer could beat or even match. I ordered at the same time reflector bracket number 1 too so they would both arrive at the same time. In just 5 days, EMS had my order delivered. All the parts were expertly packaged and the brackets were well wrapped. This reflector bracket 2, came in the standard Yamaha packaging wrapper. The quality is really great as you can see from the correct bends in the metal and the finish which is a lovely standard Yamaha satin black paint. I was really happy with how this bracket and bracket 1 came together and did not need any external force to get them to meet. Very pleased with this purchase, Thanks Webike View Detail

I bought a front roll-up on a YAMAHA YZF R1. The tackle is very good to use. The kit includes instructions and fasteners for different motorcycle manufacturers. I recommend everyone to buy, especially those who service their own motorcycle. View Detail

I've never had a motorcycle front slide. I wanted to buy for a long time and still bought it. And now I have no regrets. Honestly, at first, I could not understand how he would hold the bike, since there are no restraints. But it turns out he holds the motorcycle under his weight. Now I can easily change the front tires, disassemble the fork. He is the right thing for your motorcycle. Recommend!View Detail

The original Yamaha R1 gearshift pad. I was buying a new gearshift pad because my old gearshift pad had a lot of wear. I had to change. The foot is made of excellent material.View Detail

Original speedometer for YAMAHA YZF R1 RN12 05. Beautiful design. The dashboard has two buttons "select" and "reset". The dashboard is multifunctional. There is an arrow on the panel that shows rpm and an LCD screen for speed and more. There is an indicator on the dashboard.View Detail

Oil pan for Yamaha YZF R1. I have one oil pan in stock. A sensor is inserted into the oil pan. So in the sump there are different partitions for the oil.View Detail