TK-skivor är födda ur kombinationen av hög teknologi och noggrant val av material och behandlingar.
Utarbetad av erfarenhet, byggd med passion och testad på banan!
Det finns flera styrkor med dessa skivor :
[Material]
Materialen som används för produktionen är resultatet av år av konstant forskning och utveckling på tävlingsområdena, deras kvalitet, i kombination med skivans speciella form, garanterar också mindre slitage.
De är alla certifierade material och processen att göra skivan sker genom en försörjningskedja som möjliggör spårbarhet av den färdiga produkten.
[Vikt]
De speciella lutande koniska hålen ökar materialet som tas bort jämfört med traditionella, minskar vikten på stycket, med en åtföljande minskning av den gyroskopiska effekten :
mindre vikt på framsidan hjälper föraren och ökar hanteringen av cykeln.
[RENGÖRING PAD]
De ekvidistanta hålen gör värmefördelningen homogen (Utförda tester har resulterat i en temperatursänkning på ca 20% jämfört med konventionella skivor) , vilket avsevärt minskar "överhettningsblekningen", medan den lutande borrningen möjliggör en bättre rengöring av avloppet från eventuella föroreningar tack vare Venturis effekt.
Detta system gör att du kan använda beläggen för en längre livslängd utan att förlora bromsprestanda.
Tack vare de lutande hålen säkerställs en bättre värmeavledning och minskning av det kvarvarande vridmomentet på hjulet.
[MODULERBAR BROMSNING]
Vid monteringsögonblicket utsätts inte dynan för stötar (som en daisy disc eller med fack)
Fördelningen av hålen gör bromsningen smidig, håller alltid dynan ren och ökar säkerheten i väta eller under förhållanden med dåligt grepp.
[LÄGRE TRYCK]
På testbänken och på banan visade de en minskning av pumptrycket med samma retardation.
TK discs are born from the combination of high technologies and the careful choice of materials and treatments.
Conceived from experience, built with passion and tested on the track!
There are several strengths of these discs:
[Material]
The materials use for the production are the result of years of constant research and development on the competition fields, their quality, combined with the particular shape of the disc, also guarantees less wear.
They are all certified materials and the process of making the disc takes place through a supply chain that allows the traceability of the finished product.
[WEIGHT]
The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also of the gyroscopic effect:
less weight on the front end helps the rider and increases the handling of the bike.
[PAD CLEANING]
The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a temperature reduction of about 20% compared to conventional discs), significantly reducing the "overheating fading", while the inclined drilling allows a better cleaning of the drain from any impurities thanks to the Venturi's effect.
This system allows you to use the pads for a longer life without losing braking performance.
Thanks to the inclined holes, a better heat dissipation and reduction of the residual torque on the wheel is ensured.
[MODULABLE BRAKING]
At the moment of attachment, the pad does not suffer impacts (such as a daisy disc or with slots)
The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.
[LOWER PRESSURE]
On the test bench and on the track they demonstrated a reduction in pump pressure with the same deceleration.