Det är ett tjockt dubbelsäte som kan monteras med OEM Seat Cowl som kan monteras på ALL MODELL av förgasare / FI.
Sitsens bredd är bredare än OEM Seat så att turen är bekväm, och foten liknar OEM Seat genom att tunnare fotdelen och eliminera fyrkantiga hörn.
När sittläget blir högre blir knäböjningen lös, och ridställningen blir närmare den stående hållningen och belastningen på höfterna flyttas till fotstiftet.
Genom att öka fotstiftets belastning minskas belastningen på höfterna och det är lättare att använda kroppen med fotstiftet.
En plats som gör lång turnering mer bekväm och roligare.
Använd injektionssvampen som avfyras i formen.
Den har bra kuddegenskaper och lite försämring över tid, så du kan använda den under lång tid.
■ Funktioner
Vanligt svart används för hela läderet, och mitt sömmarna är en vit rörled.
Piping Line är en A-typ som sträcker sig till tankens sida.
■ Installation
Det är nödvändigt att flytta Seat Damper från OEM Seat för installation på fordonets kaross.
Fäst den medföljande fästet på bränsletankens sida och fixera baksidan med OEM Sitsbult som OEM Seat.
Det kan användas med OEM Grab Rail eller K & H-bakre fender.
När den används tillsammans med Y's Gear Carrier måste monteringshårdvara vara inverterad.
This is a thick double seat that can fit the stock seat cowl on all years of carburetor / FI models.
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
■Features
The entire leather is plain black, with white piping at the center seam.
This is the A type where the piping line extends to the tank side.
■Mounting
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.