Enkel sidoväskaSeries för Motorcykel som inte stör dig varje dag.
Konceptet är enkelt.
Motorcykelridning kräver "Enkel montering / lossning med en kapacitet som kan användas varje dag, tvåsits OK och vattentät".
Alla dessa villkor [Färg] Klar och utvecklade en unik mekanism för att stödja många typer av fordon inklusive sport-motorcykel.
Denna vattentäta sidoväska förföljer en form för motorcykel ridning, täcker från pendling på vardagar till Touring på helgdagar.
・ Ba Indiana Belt
Indiana Belt som tillfälligt kan ha handdukar och handskar etc.
(Använd inte när du är i sidoväska.)
· Framficka
Framficka i Drip Proof Specification som är bekvämt för förvaring av små föremål som ofta sätts in och ut.
・ Bär stil på 2WAY
Bärande tygväskan är en tvåvägs bärstil som kan väljas från handhållare och axlar.
・ För enkel användning är Single bättre än Double.
Massor av bagage, men kvantitet: par (för vänster och höger) Dubbelsäck som tar tid att ta balansen i vikt.
Om du har mindre bagage för pendling eller en dagsutflykt kommer Singelsideväskan med One Side att använda mindre stress.
・ Vattentäta presenningar som är resistenta mot lera och regn.
Plötsligt regn och lerigt vatten stänkte av Tire.
Förutsatt att en motorcykel är ridplats, används presenningar material som inte förorenar innehållet och är lätt att underhålla.
Inget regntäcke krävs och ditt bagage är säkert även i plötsligt regn.
-Fullständig installation bara genom att ansluta.
Enkel installation genom att leda spetsen av GHook genom Loop och applicera spänning med bältet.
Den besvärliga installationen av sidväska påskyndar dramatiskt.
Doppelgangers unika monteringsmekanism som fixeras ordentligt på fyra platser totalt: Seat X2, främre X1 och bakre X1.
-Daisy-kedjan Ett pekbälte som kan användas för både fast bas och lastkrok.
Touch Belt, en Daisy-kedja för Doppelgangers enda sidväska, som är en vanlig Spec.
Det är ett flerfunktionsbälte designat inte bara som en fast bas för BagBody utan också som en lastkrok för att ladda bagage på baksatserna.
・ Storlekskonstruktion för tvåsitsar.
Kroppsstorlek utformad för att passa bredvid baksatserna för att minska kontaktspänningen med påsen i en tvåsits.
Eftersom den totala längden undertrycks kan Passenger använda Pillion Footpeg utan svårigheter.
If you're gonna wear it, wear it.A tote type motorcycle bag that is thoroughly focused on looks.
A series of single side bags for motorcycles that are easy to use every day.
The concept is simple.
What motorcyclists are looking for is "a capacity that can be used on a daily basis, easy to put on and take off, two people can ride, and waterproof".
In order to meet all of these requirements and to be compatible with many types of bikes, including sport bikes, we have developed a unique mechanism.
It is the waterproof side bag that pursues the form for the motorcycle rider to cover from the commutation of the weekday to the touring of the holiday.
[remakes standard bag category as motorcycle bag]
A tote bag that holds a lot of stuff and is easy to use, and is popular as a fashion item is remade into a bag for motorcycles.
"We aimed to create a motorcycle bag that you can carry around town without feeling uncomfortable, by thoroughly removing the equipment and functions unique to motorcycle accessories that make you feel like you are carrying a motorcycle bag.
The capacity is 17L, which can fit A4 size documents.
■Binding belt
Binding belt for temporary hanging of towels, gloves, etc.. *Do not use with side bags.
■Front pocket
Splashproof front pocket for storing frequently accessed small items.
■2-way carry style
The tote bag comes in a 2-way carry style that allows you to choose between handheld and shoulder carry.
[For ease of use, single over double]
A double bag can hold a lot of stuff, but it takes time to balance the weight of both sides.
If you are a commuter or a day tourer with little luggage, single side bag is less stressful to use.
[Dirt and rain resistant, waterproof tarpaulin]
Sudden rain or muddy water splashed up by tires.
It is made of tarpaulin material which is easy to clean and does not stain the contents.
You don't need a rain cover and your luggage is safe even in a sudden rain.
[Just hook it up and you're ready to go]
Simply slip the tip of the G-hook through the loop and apply tension with the belt.
It speeds up the installation of the side bags.
This is Doppelganger's original mounting mechanism, which is firmly fixed at four points in total: two seats, one in front of the vehicle and one behind the vehicle.
■Doppelganger G-hook
Original designed thick-walled G-hook. Deep claws for secure hooking.
The curve of the belt adjustment slider holds the belt firmly in place.
■Hang belt
Special belt to support the bag.
The G-hook at the end of the bag connects to the seat side, and the height of the bag can be adjusted during installation.
Rubber belt to prevent slippage.
■Front and rear fixing belts
Color-coded belt length, special fixing belt for connecting the bag to the front and back.
This is a device to make it difficult to mistake the front and rear of the vehicle when installing it on the vehicle body.(BK: Long / GY: Short)
[Can be used as a fixed base or as a load hook, daisy chain attachment belt]
A daisy chain attachment belt for Doppelganger single side bags, common to the series.
This multi-purpose belt is designed to be used not only as a base for fixing the bag itself, but also as a cargo hook for loading luggage on the rear seat.
■Two types of loops
Attachment belt with both a loop (15mm wide) for connecting the bag body and a regular daisy chain (40mm wide).
■As a load hook
It can also be used as a cargo hook to secure luggage on the rear seat.
Useful for increasing the load capacity of motorcycles that are difficult to use touring cords because there are few places where they can be fixed.
■Anti-slip rubber belt
Non-slip rubber on the attachment belt.The G-hook enhances the fit and prevents the belt from shifting due to motorcycle vibration.
[Designed to fit two people comfortably]
Body size designed to fit next to the rear seat to reduce the stress of contact with the bag when riding with two people.
The length of the pillion step is reduced so that the passenger can use it easily.
[features of each part]
■Tarpaulin material
Tarpaulin material is used to keep the contents clean and easy to clean.
No need for a rain cover to protect your cargo from sudden rain or muddy water splashed by oncoming vehicles.
■Roll-top structure
The opening of the bag has a waterproof roll-top construction.
■Shape Retention PE Board
PE board is built into the back of the bag where it meets the body (rear cowl) and support brackets.
It prevents the bag from deformation and improves the stability of the bag.
■Shaped Form
EVA foam is incorporated in the exterior of the bag to prevent the bag from losing its shape.
The bag will keep its shape regardless of the amount of storage.
■Hang belt loop
Hang belt loop to fix the part of G-hook that connects the bag to the vehicle when carrying the bag to the main body of the bag.
■Internal mesh pocket
There are three mesh pockets inside the bag for storing small items.
■Fastener Puller for Globe
The shape is easy to pick up even when wearing gloves, and the zipper puller is easy to open and close the bag.
■Falling off prevention belt
After fixing the main body of the bag to the vehicle body with the G-hook, the daisy chain attachment belt is connected to the main body of the bag with the anti-drop belt.
■Handle excess belt with belt reel band
By using the belt reel band attached to the end of the mounting belt, you can wind up the belt to reduce the flapping caused by running wind.
[How to attach the bag]
1. Remove the seat from the vehicle and attach two daisy chain attachment belts to the seat.
2. Check the position of the daisy chain and set the position and distance of the bag.
3. Short intervals of daisy chain for G-hook.Longer intervals are for drop protection belts and for general use.
4. Install the seat.The excess belt can be stored under the seat.
5. Connect the G-hooks on the left and right hang belts of the bag to the daisy chain.
6. Connect the anti-fall belt to the hand strap via daisy chain.
7. Attach the front fixing belt to the vehicle body and connect the loop on the back of the bag with G-hook to fix the bag.
*Connect the hook end downward to the loop.
8. Attach the rear fixing belt to the vehicle body and connect the loop on the back of the bag with the G-hook to fix the bag.
*Connect the hook end downward to the loop.
[how to use the Bertolier band]
The front fastening belt and the rear fastening belt have a function to bind the excess belt after the bag is attached.
It prevents the excess belt from flapping when driving, and improves the safety of riding when the bag is installed.
1. Unfold the hook and loop fastener on the end of the belt.
2. With the hook and loop fastener in place, roll up the excess belt.
3. Bind the rolled-up belt and the belt to be fixed with hook and loop fasteners.
4. The excess belt is fixed to prevent the belt from flapping when running.