[Storlek] 80 mm x 140 mm
[Justeringsmekanism] 10 steg (18 graders intervall)
[Spec.]
・ Ny spegel
[Kvantitet] Antal: 2st. Uppsättning (Antal: Par (för vänster och höger) )
[Inkluderade delar:] (Totalt 6)
・ 10mm: Normal gängskruv X2, motsatt gängskruv X1
・ 8mm: Normal gängskruv X2, motsatt gängskruv X1
[Installationstid] 0,2 h
* Bilden är en bild.
* Bilden innehåller annan färgning.
* För Yamaha-fordon, använd en äkta adapter tillsammans.
* Var god och bekräfta din kropp innan du köper.
* Det finns ingen bekräftelse på installationen förutom fordon som är listade i kompatibla fordon. Fordon som inte är listade kan inte installeras eller har inte bekräftats.
* Produktfärgen kan skilja sig beroende på fotograferingsförhållanden, bildskärm, produktparti och uppsättning produkt.
* Miller säkerhetsstandarder har reviderats och nya standarder tillämpas för nya modeller som var certifierade typ sedan januari 2005 och kontinuerliga produktionsfordon som kommer att släppas efter januari 2007.
[Ny standard]
Cirkulär typ är 94 mm eller mer i diameter och mindre än 150 mm i diameter, annan än cirkulär typ som rektangulär typ, att cirkeln med diameter 78 mm är monterad, att den är vertikal 120 mm bredd 200 mm eller mindre.
Struktur för att lindra chock när en spegel rör en fotgängare eller liknande.
* Den reflekterande ytans mitt passerar genom ratten och är minst 280 mm från det vertikala planet parallellt med körningsriktningen.
* Var noga med installationsmetoden.
* Det finns ingen bekräftelse på installationen förutom fordon som är listade i kompatibla fordon. Fordon som inte är listade kan inte installeras eller har inte bekräftats.
* Produktfärgen kan skilja sig beroende på fotograferingsförhållanden, bildskärm, produktparti och uppsättning produkt.
* Spegelns fästdel är en höger och vänster positiv skruvfordon kan monteras som den är. (Honda, Kawasaki, Suzuki)
* Använd alltid en äkta adapter för fordon med antingen en vänster eller höger spegelfäste och en bakre skruv. (YAMAHA)
* Var god och bekräfta din kropp innan du köper.
[Size] 80mm (length) x 140mm (width)
[Adjuster mechanism] 10-way (18 degree intervals)
[Set components]
・Main body (set of 2)
・10mm right handed screw x 2 / left handed screw x 1
・8mm right handed screw x 2 / left handed screw x 1
[Installation time] 0.2h
*Image may contain other colors.
*Please note the installation instructions.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*Please make sure to check the vehicle before placing an order.
*This product can be installed as it is if the mirror mounting part is right handed screw on both sides.(HONDA, KAWASAKI, SUZUKI)
*For vehicles with mirror mountings that are left handed screw on either side, be sure to use the stock adapter.(Yamaha)
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product.
*[How to adjust]
The angle can be adjusted by loosening with a 6mm hex wrench.
The angle can be adjusted in 18° increments.When tightening, align with the groove, otherwise the groove may be crushed.(See image)
*[New standard]
For a circular type, the diameter must be between 94mm and 150mm, and for a non-circular type such as a square type, the diameter must be 78mm and the length must be 120mm and the width must be 200mm or less.
Its structure soften the impact when the mirror comes into contact with a pedestrian.
The center of the reflective surface shall be at least 280 mm outside the vertical plane parallel to the direction of travel, passing through the center of the steering device.
*There may be changes in product specifications due to the manufacturer's reasons.