"Φ 48 Small DN Tachometer Kit 12500RPM" som kan monteras på kopplad utan kabeldragning kopplad till STD Handlebar
■ INFORMATION
Denna produkt levereras med klämhållare som motsvarar OEM Handlebar och Sub Harness för exklusiv användning av fordon, så det finns inget behov av bearbetning av OEM-delar och Ledningsbearbetning, Φ 48 Small DN Tachometer 12500 RPM CROSS CUB50 (AA06) · CROSSCUB110 (JA45) Du kan installera det.
Kabeldragningen kan anslutas med koppling med Sub-sele dedikerad till Service Coupler i 6 V MONKEY / GORILLA Main Harness.
■ Φ48 Liten DN Tachometer DN = DigitalNeedle
Eftersom pekarvinkeln är helt styrd med Digital Signal & Small TypeMotor är pekarens hållkraft hög och pålitligheten är utmärkt.
Förutom rotationshastighetsfunktionen inkluderar MeterBody termometer, klocka, EngineWorkTimer, automatisk mätfunktion (Maximal temperaturinspelning / Maxhastighetsinspelning) också.
Vit LED-belysning på den svarta panelen är enastående vid nattigenkänning också.
■ Φ 48 Small DN Tachometer Detaljer
・ Monitoren är utrustad med olika funktioner (Digital skärm)
Termometer (Kan mäta upp till 150 grader) Eftersom Stick Temperature Sensor ingår, kan du mäta utetemperaturen genom att sätta Temperatursensorn i en skål.
・ Automatisk mätfunktion
Maximal temperaturinspelning / maximal rotationshastighetsinspelning utförs automatiskt när mätaren är installerad.
När du har kört kan du kontrollera inspelningen genom att växla Meter-displayen, och posten sparas tills återställningen är klar.
· EngineWorkTimer
Timer för att automatiskt lägga till motorens driftstid på 500 rpm eller mer.
Den stannar när den blir mindre än 500 rpm.
Största tiden: 9999 timmar (Upp till 100 timmar registreras i minuter, och över 100 timmar spelas in i 1 timmes enheter.) Återställ tillgänglig. Dold inställning tillgänglig
·klocka
Visa 24 timmar Dölj inställning
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed on the stock handlebar without any wiring modification
■Details
This product comes with a clamp bracket that is compatible with the stock handlebar and a motorcycle specific sub-harness, so you can install the Φ48 Small DN Tachometer 12500RPM on the Cross Cub 50 (AA06) and Cross Cub 110 (JA45) without the need to modify the stock parts or wiring.
The wiring can be connected to the service coupler on the main harness by using the dedicated sub harness.
■Φ48 Small DN Tachometer DN = Digital Needle
The angle of the pointer is completely controlled by a digital signal & small motor, which provides high reliability and high holding power of the pointer.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
■Φ48 Small DN Tachometer Details
・The monitor is equipped with a variety of functions (digital display)
A thermometer (up to 150 degrees) and a stick temperature sensor are included, so you can measure the outside air temperature by placing the temperature sensor inside the cowl.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock
24-hour display with hide setting