Inbyggd tändare
[Produktinnehåll]
Reviderad tändspole kropp x1pc.
45-graders Plug Cap x1pc.
Cap Fixing 100mm / Tie Wrap x2pcs.
* Det motsvarar inte CDI-tändningsfordonet för förgasare.
* Det är omöjligt att montera befintlig OEM-spoleposition eftersom "Förstärkning" är konstruerad för en stor spolkapacitet.
* Det finns fall där det krävs bearbetning som fäste beroende på monteringsplatsen.
* Det är möjligt att använda tillsammans med antändartypen som ökar primärspolen.
* Vänligen öka det med bränslekontrollen mm. om nödvändigt eftersom A / F-värdet är tunt även om "brytkraft" används ensam.
* Kontrollera tändstiftets tillstånd och ställ in värmevärdet.
Built-in Igniter
[Components]
・Modified power ignition coil body x 1pc
・45 degree plug cap x 1pc
・Cap fixing 100mm cable-tie x 2
*This product is not compatible with carburetor vehicles with CDI ignition.
*"KAIRIKI" can not be installed in the existing stock coil position because of the large coil large capacity design.
*Depending on the installation location, modification of the cowl may be required.
*Since "KAIRIKI" has a built-in igniter, the igniter of the type that boosts the primary voltage of the coil cannot be used together.
*Even if you use "KAIRIKI" by itself, A / Fga will be diluted, so if necessary, increase the amount by fuel controller.
*Check the condition of the spark plug and adjust the heat value.