Färg : Silver
Handtag Monteringshål : 22,2
Spegelmonteringshål : 10mm
* Cellen kommer inte att rotera, även om du håller kopplingsspaken och trycker på cellknappen när det gäller en motorcykel med OEM-spaken när du byter ut för en spakhandtag, eftersom kablarna som är anslutna till OEM-hållaren också tas bort från huvudet sele tillsammans.
* Därför roterar cellen när den ansluts direkt till 2 ledningar som kommer från huvudbältet.
* Vidare monteras i motorcykelaffären eftersom det krävs bearbetning av ledningarna i det tillstånd där ledningarna inte kan dras ut.
* Observera att det inte kommer att bli lätt om du inte byter tråd med en ny av kopplingstråden själv är rostad och rörelsen är tung.
* Det är omöjligt att installera eftersom tråden blir en penna om den inte fäster efter att du först ställt upp kopplingstråden till det maximala antalet vid montering.
* Vänligen justera spelets spelning till STD-tillståndet efter installationen.
* Det är omöjligt att montera en hävarm monteringsdel som en HONDA motorcykel till den vänstra växellåda integrerad typ.
* Ej monterbart fordon (såsom CB750KO-K6 / CB550F / CB500F / CB400F / CB350F / HAWK-serien)
Color: Silver
Handlebar mounting holes: 22.2
Mirror mounting holes: 10mm
*When you replace the lever holder with a light clutch lever holder, if your bike has a stock lever switch, the wiring for the stock holder will also be disconnected from the main harness, so the starter will not work even if you hold the clutch lever and press the starter button.
*Therefore, if you connect the two wires from the main harness directly, the starter will turn.
*If the wiring is not disconnected, it is necessary to modify the wiring, so please have it installed at a motorcycle shop.
*Please note that if the clutch wire itself is rusted inside and the movement of the bike is heavy, it will not become lighter unless the wire is replaced with a new one.
*When installing the clutch wire, first make sure that the clutch wire has the maximum amount of space before installation, otherwise the wire will become flat and cannot be installed.
*Please adjust the space of the wire to normal condition after installation again.
*This product cannot be installed on Honda or other vehicles with an integrated left switch box.
*Uninstallable models (CB750KO-K6 / CB550F / CB500F / CB400F / CB350F / All HAWK series models etc.)