Typ av pappersfilter
Storlek : Gemensamt för Φ6-Φ8 (Stor typ)
[Specifikationer]
Insertion Part Inner Diameter : Φ4.0 / Φ6.0
Insatsdel Yttre diameter : Φ6.0 / Φ8.0
Maximal yttre diameter : Φ37.0
Total längd : 108.0mm
Motsvarande slangens inre diameter : Φ5,5 till 8,0
* Se till att klippa av Φ6 del med en skärare mm. när du använder Φ8 infogningsporten på Φ6 / Φ8 vanligt (14485/40863).
* Den maximala ytterdiametern är ytterdiametern hos huvuddelens gemensamma del.
* Detta är full längd inklusive plug-in-del.
* Den motsvarande slangdiametern är endast en guide.
[Anmärkningar]
* Det är dags att byta ut icke-sönderdelande filter när smuts blir igensatt. Det måste kontrolleras, eftersom om du lämnar utan att ersätta flödesbanan blockeras damm och bränslet kommer sluta strömma. Tänk dessutom på installationsriktningen så att det inte kommer att bli en sådan situation.
* Den är inte användbar för stor kaliberförgasare som FCR. En tillfredsställande mängd bränsle kommer inte att matas till förgasaren när den används.
* Det finns ingen starkare värme eftersom det är en plastprodukt. Det finns ingen starkare värme. Det finns möjlighet till deformation etc. genom värme.
* Varje produkt bestäms för bränsleinflödesvägen. Vänligen kontrollera innan du installerar.
* Sätt in slangen och säkert med bandet. bränslet kommer att läcka och leda till allvarlig olycka, såsom eld när det är osäkert.
Paper Filtration Type
Size: For both Φ6 and Φ8 (Large type)
[Specification]
Inner diameter of insertion part: Φ4.0 / Φ6.0
Outer diameter of insertion part: Φ6.0 / Φ8.0
Maximum outer diameter: Φ37.0
Full Length: 108.0mm
Applicable hose inner diameter: Φ5.5 to 8.0
*When using the Φ8 insertion port of the Φ6/Φ8 common (14485/40863), be sure to cut off the Φ6 part with a cutter.
*The maximum outer diameter is the outer diameter of the mating part of the body.
*Overall length is the total length including the insertion part.
*Compatible hose diameters are for reference only.
[Caution.]
*It is time to replace the non-dissolving filter when it is clogged with dirt.If left unchanged, the flow path will be blocked by debris and the gasoline flow will be insufficient, so it is necessary to check it frequently.In addition, please consider the direction of installation to avoid such a situation.
*Cannot be used with large diameter carburetors such as FCR.If used, a satisfactory amount of gasoline will not be supplied to the carburetor.
*Resin products are not resistant to heat.Install the unit in a location where it will not be affected by heat from the engine.It may be deformed by heat.
*The gasoline flow path is fixed for each product.Please check before installation.
*Insert the hose and secure it with the band.If it is not secure, gasoline may leak and cause a fire or other serious accident.