När inställningen är inställd på 10 tums, 12 tums baksats, är EnginePivot-läget utformat för att vara den optimala fotspetspositionen.
Dessutom, eftersom tyngdpunkten är låg, ökar bilens stabilitet och nöjet att hantera den ursprungliga motorcykeln kan ytterligare förbättras.
Motorns monteringsposition kan flyttas från mittkroppens mitt till vänster 7mm så 4JWide hjul eller NSRWheel etc. kan användas utan att använda Offset sprocketetc. (Vänligen använd den bifogade färgen.)
Funktion 1: Huvudröret förenat
Huvudröret skärs enhetligt, Ramdelarna är inte monterade med alla Boltaggregatstyp.
Alla motorns monterings- och svängarmspindelplattformar är gjorda i en konstruktion som inte tar emot belastningen i skjuvriktningen med Bolt genom att applicera Knock Pin-bearbetning till alla skruvdelar och realiserar hög hållfasthet.
Funktion 2: Mottagning av sidofäst typ upphängning
MONKEYFrame antog den första Side Mount Typ Suspension mottagaren.
Vi strävar efter att koncentrera öring och syfta till förbättrad träning.
Suspension mottagande delen har blivit en excentrisk mekanism, och det gör det enkelt att justera fordonets höjd genom att rotera den. (± 5 mm)
Funktion 3: Direktmontering
Genom att montera baksatser på ram och direkt förbättrar vi driften genom att undertrycka böjning.
Funktion 4: Justerbar vridning
Pivot Collar "Center Type" "Off-Set Type" Två typer ingår och det är möjligt att byta hängande vinkel på Swing Arm genom att byta ut. (Standardposition, rörlig upp och ner 4 mm.)
■ Alternativ
? 39961 Bearing race Pressmontering
· 39974 Bromspedalaxel
* Normal bromspedal och förstärkt plåt med motorfäste (39.407) Den används för simultan installation av.
· 39945 Bromspedalaxel Kort
* Motormonterad förstärkt platta (39.407) Den används endast vid installation.
? 39965 British Silver for Oil Cooler tillverkad av KITACO (Svart produktnummer 39948)
· 39966 Fäste för EARLS Oljekylare Silver (Svart produktnummer 39949)
The engine pivot position is designed to be the optimum step position when using a 10" or 12" rearset.
In addition, the low center of gravity increases the stability of the body and allows the rider to enjoy the original fun of riding a motorcycle even more.
Since the engine mounting position can be moved 7mm to the left from the center of the vehicle, 4J wide wheels and NSR wheels can be used without using offset sprockets.(Please use the supplied collar for each.)
Feature 1: Head pipe machined in one piece
The head pipe is machined in one piece and all frame parts are assembled with bolts without welding.
All engine mounts and swingarm pivot plates are designed with knock pins on the threaded portions to prevent the bolts from receiving shear loads and to achieve high strength.
Feature 2: Side mount type suspension support
The first side-mounted suspension support for a monkey frame.
The aim is to concentrate the mass and to improve the driving performance.
The suspension support part is eccentric mechanism, and it is easy to adjust the ride height by rotating it.(±5mm)
Feature 3: direct mount
The rearset is mounted directly to the frame to reduce flex and improve maneuverability.
Feature 4: variable pivot
Two types of pivot collars are included, center type and offset type, which allows you to change the swingarm's droop angle.(Standard position, can be moved 4mm up and down.)
■Options
・39961 Press-fit machining of bearing race
・39974 Brake pedal shaft
*For use when installing the stock brake pedal and engine mount reinforcement plate (39407) at the same time.
・39945 Brake Pedal Shaft Short
*For use when installing the engine mount reinforcement plate (39407) only.
・39965 Bracket for KITACO Oil Cooler Silver (Black is part number 39948)
・39966 Silver bracket for Earl's oil cooler (Black is part number 39949)