[Produktbeskrivning]
■ 17R steg E-cylinderhuvud
Stort ventilintag : 26mm / Uttömma : 22,5 mm baserat på lagerhuvudets form.
(Lagerventildiameter för 12V Monkey är intag: 19mm / Avgas: 16mm)
Detta är SP Takegawas original cylinderhuvud som använder den optimala klämvinkeln, förbränningskammarformen och portformen för ventiler med stor diameter.
Portdiametern på 17R-steget är 24,5 mm för insug och 19 mm för avgas, jämfört med 14 mm för insug och avgas på lagerhuvudet. Dessutom möjliggör den tredimensionella portformen, i kombination med ventilerna och portarna med större diameter, att mer inlopp och avgaser flyter smidigt.
Ventiler : (Inlopp 26mm / Avgas 22,5 mm ventilspindeldiameter : 4,5 mm)
På grund av ventilernas större diameter har viktökningen hållits på ett minimum genom att använda en smalare skaftaxel och midjebearbetning.
Ventilfjädrar : Ojämn tonhöjd (2-stegs tonhöjd) Enkelventilfjädrar med optimal fjäderhastighet används för att förhindra vallning vid högt varvtal.
■ Super Sport kamaxel
En oljeledning är anordnad i centrum av kamaxeln för att styra olja till kamhjulen, vilket ökar hållbarheten och smörjningen av kamkedjan. Kamaxelhållarna stöds av kullager i båda ändar för att minska friktionsmotståndet mot kamaxeln under uppstart och vid låga hastigheter.
Kamaxelhållarna stöds av kullager i båda ändar för att minska friktionsmotståndet mot kamaxeln under start och från låga hastigheter.
Efter att du har köpt 17R Stage E kan du ändra till 17R Stage + D-specifikationen.
Du kan uppgradera till 17R Stage + D genom att köpa 17R Stage E Decomp Camshaft Kit.
■ Φ52H Cylinder (hylscylinder av aluminiumstål)
Externt är det samma design som lagercylindern på Cub-motorn (cylinderns höjd är annorlunda).
M5-temperatursensorn kan anslutas till sidan av cylindern och cylindertemperaturen kan mätas med SP Takegawas kompakta LCD-mätare (Med M5 temperatursensor) eller genom att ändra termometerns sensordel till M5-temperatursensorn.
■ Kolv
Kolvarna har en molybdenbeläggning på kjolen för att förbättra den initiala acklimatiseringen.
■17R Stage E Cylinder Head
Based on the stock head shape, large diameter valve intake: 26mm / exhaust: Adopt 22.5mm.
(12V Monkey stock valve diameter is intake: 19mm / exhaust: 16mm)
This is SP Takegawa's original cylinder head which adopts the most suitable valve pinching angle, combustion chamber shape and port shape for large diameter valves.
The port diameter of the stock head is 14mm for both intake and exhaust, while the port diameter of the 17R stage is 14mm for intake and exhaust: 24.5mm / exhaust: Larger diameter of 19mm.In addition, the adoption of a 3-dimensional port shape, combined with the larger diameter of the valve and port, makes it possible for more intake and exhaust gases to flow smoothly.
Valve: (Intake 26mm / Exhaust 22.5mm Valve stem shaft diameter 4.5mm)
The weight increase due to the larger diameter of the valve is kept to a minimum by the narrower stem shaft and waist machining.
Valve Springs: The single valve spring with unequal pitch (2-stage pitch) is adopted for optimum spring rate and suppresses surging at high rpm.
■Super Sport Camshaft
An oil line is provided in the center of the camshaft to guide the oil to the cam sprocket and improve the durability and lubrication effect of the cam chain.
The camshaft journals are supported by ball bearings on both ends to reduce frictional resistance to the camshaft during starting and at low speeds.
After purchasing 17R Stage E, you can change to 17R Stage +D specification.
You can upgrade to 17R stage+D by purchasing 17R stage E decompression camshaft kit.
■Φ52H Cylinder (Aluminum steel sleeve cylinder)
It is the same design as the stock cylinder of the Cub engine in appearance (the height of the cylinder is different).
The M5 temperature sensor can be connected to the side of the cylinder, and the cylinder temperature can be measured by using SP Takegawa's compact LCD meter (with M5 temperature sensor) or by changing the sensor part of the thermometer to the M5 temperature sensor.
■Piston
The piston has a molybdenum coating on the skirt for better initial adhesion.