Det är ett tredimensionellt emblem som kan fästas på bränsletanken, sidokåpan. Som en punkt Attachment.
Kroppen har Material: Plast är adopterat, Plating appliceras på ytan av karaktärsdelen.
Emblem Dubbelsidigt band för starkt yttre är klistrad på baksidan.
Det finns två typer av Plating: Silver och Gold, två typer av LargeSmall tilldelas varje Mängd: 2pc. Ange med fyra totalt antal: 1 Set.
[Ge råd]
Vi adopterar starkt vidhäftningssät, så kontrollera positionen innan du klistrar in.
Om fukt, olja, damm och vax är närvarande kommer vidhäftningen att vara extremt dålig, så rengör och avfetta vidhäftningsytorna noggrant.
Miljö med låg omgivningstemperatur (5 grader eller mindre) För att förstärka den initiala vidhäftningskraften, vänligen arbeta efter lite uppvärmning av klistersätet.
Efter klistra in, tryck gärna från toppen för att stärka vidhäftningen. Skölj inte eller regn under 1 eller 2 dagar efter klistret.
This is a three-dimensional emblem that can be attached to the gas tank, side cover, etc. as a one-point accessory.
The body is made of plastic, and the surface of the letters is plated.
Strong exterior double-sided tape is attached to the back of the emblem.
Plating is available in silver and gold.Two large and two small, total 4 pieces per set.
[Advice]
The strong adhesive sheet is used, so please check the position of the adhesive sheet carefully before installation.
If there is water, oil, dust, or wax on the surface, the adhesive strength will become extremely poor, so be sure to thoroughly clean and degrease the adhesive surface.
When working in a low temperature environment (below 5 degrees Celsius), warm up the adhesive sheet a little before working in order to strengthen the initial adhesive strength.
After pasting, please press well from the top to strengthen the adhesive force.Please do not wash your car or drive in the rain for 1 or 2 days after application.