Det är integrerad typ Fender Eliminator Kit för ZrX 1100/1200 - 08!
Eftersom det är en integrerad typ från under Seat till runt bakom, kommer jag att vara väldigt uppfriskande.
Designad för att eliminera klyftan mellan Tail cowl och Fender Eliminator så mycket som möjligt, passar det elektriska systemet naturligtvis också snyggt.
Eftersom FuseBOX Fixed Rubber också ändras till den bifogade, kan Rubber inte ses från baksidan.
Batterisektionen kan lindas och batterikapslingen finns också i Kit så att den kan lagras snyggt.
Därför kommer OEMs tillbehörsfodral inte att användas!
"Kort batteri BOX" Spec. (Tidigare namn "WillySwing ArmSpec.") Är en produkt vars botten av BatteryBOX beräknas med 33mm från botten av OEM-botten.
Förutom Willys Swing Arm utrustade fordon,
För Active 's "Press Forming Swingarm ZrX 1200' 01 - '08" kan också installeras i denna Spec.
Om det är installerat samtidigt, tar det tid och ansträngning att klippa rutan OEMBatteri.
Om du för närvarande skärning OEMBatteryBOX, eller tänker på Cut of OEMBatteryBOX,
Varför anser du inte att du bär den?
This is the integrated fender eliminator kit for ZRX1100 / 1200 -'08!
Because it is a single unit from under the seat to the rear, it is very clean.
Designed to minimize the gap between the tail cowl and fender eliminator.Of course, the electrical system also fits nicely.
The fuse-box fixing rubber is also changed to the attached one, so you can't see the rubber from the back.
The battery case cover is included in the kit, so it can be stored neatly.
Therefore, the original accessory case will not be used!
The "Short Battery Box" specification (formerly known as the "wheelie swingarm" specification) is a product where the bottom of the battery box is 33mm higher than the bottom of the stock battery box.
In addition to vehicles with wheelie swingarms,
Active's "Press-Formed Swingarm for ZRX1200 '01-'08" can also be installed with this specification.
You don't need to cut the stock battery box if you install it at the same time.
If you are currently cutting the stock battery box, or thinking of cutting the stock battery box,
Why don't you consider installing it?