APA / Till GORILLA, NSR50 / Det är Swing Arm som kan passa 80 hjul.
Svängarm Bredden är 184 - 187 mm.
NSR50 / Det är möjligt att göra MONKEY 12-tums med 80-tums 12-tums hjul.
■ Alternativ Beskrivning
[Swing Arm finish]
· Svart Anodiserad Efterbehandling (GCraft artikelnummer : 60198) Tasu25000 yen
· SeraCoat finish (GCraft artikelnummer : 60807) Tasu30000 yen
[Vad är SeraCoat?]
SeraCoat är en målning gjord av NIC, som för närvarande används i USA: s militärgrupp, speciell bakfärg, kallfärg.
Det är inspekterat för att klara hårda förhållanden och det är en färg som produceras och produceras för prestationsbetoning, såsom värmebeständighet, nötningsmotstånd, hållbarhet, lösningsmedelsbeständighet, värmeavledning, värmeisolering etc.
Keramik pulveriseras av en speciell maskin och blandas i färg för att förbättra styrkan hos beläggningsfilmen. På grund av det blir det en satinliknande yta, men beläggningen kan göras mycket tunn (25Micron)
Svetsmärken (Pärla) Det är också möjligt att lämna utan att gömma sig.
Adhesivitet är det högsta värdet bland Beläggningsmaterial, Skrynkliga kan inte formas även genom vikning. Färgen är inte lätt avskalad av stenar, så den är lämplig för ram, Swing Arm-ytbehandling.
* Normalt leveransdatum + 3-5 veckor.
[Alternativ : Chain SliderSpec.]
KedjeskärareBoltstopp Spec. (GCraftProductNo : 60228) +1000 yen
Byt kedjeledare från nitstopp till bultstopp. Lätt att byta ut när den är sliten.
[Alternativ : Ställ HookBase tillsatsbehandling]
Stand HookBase (M6) Ytterligare bearbetning (GCraftProductNo : 60903) +3000 yen
GCraft gjorde stånghake eller utanför företaget gjort stånghaka, (M6) Du kan installera.
[Alternativ : Pivot del struktur]
Pivot del Bearing Specification (GCraftProductNo : 60006) +3000 yen
Standard ändrar Pivot-delen av Bush till Bearing.
Förbättrad hållbarhet och smidiga driftsegenskaper uppnås.
[Alternativ : Kedjespänning Spec.]
Kedjedragande alternativ
· Racing Stand HookSpec. (GCraft artikelnummer : 60186) +3000 yen
Vi kommer att ändra den konventionella Chain Draw Back to Stand HookSpec.. GCraft artikelnummer : 32071 · 32072 · 32073 Racing Stand hook kan installeras.
* GCraft artikelnummer : 33170APLockheed caliperSupport inte monteras (Och störningar)
· Bak dragstyp (GCraft artikelnummer : 60221) +3000 yen
Det är en back drawing Adjuster som utformades för att eliminera det besvärliga underhållet av underhåll vid justering.
Swing Arm Eftersom Justermutter kommer till baksidan är det enkelt att justera Justera sektionen som var svår att vända på grund av verktygsinterferens och så vidare.
* Racing Stand HookSpec., OWType kan inte installeras samtidigt
· OWType (GCraft artikelnummer : 60014) +3000 yen
Genom att bearbeta kedjebilddelen av Taper eliminerade vi övre och nedre luckorna på axelaxeln.
Eftersom det bearbetade stycket rör sig, finns det inga övre och nedre luckor. Det är en mekanism som också antas av Swing Arm of Big bike.
· OWType Racing Stand HookSpec. (GCraft artikelnummer : 60188) +5000 yen
Byt ut OWTypeChain-subtraktion Bakåt till stativhookSpec.
GCraft artikelnummer : 32071 · 32072 · 32073 Racing Stand hook kan installeras.
* GCraft artikelnummer : 33170APLockheed caliperSupport inte monteras (Och störningar)
· Excentrisk typ (GCraftProductNo : 60199) Tasu6000 yen
Det är en kedjesubtraktion av den excentriska formeln som vanligtvis finns i Kawasaki Motorcycle.
* När den används för * discSpec., Kan du bara använda Caliper-stöd av typen Caliper längst ner på Swing Arm.
* för Wide WheelSwing Arm kan endast användas med discSpec.
This is a swingarm that can be used with NSR50 / 80 wheels on Monkey / Gorilla.
Swingarm width is 184-187mm.
Using the 12 inch wheel of NSR50 / 80 to convert the Monkey to 12 inch can be done.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.