Märkspänning : Den kan användas till 12v AC-DC.
Specifikation : 6000K
Typ : PH7
Ingår Delar : med HS5-typ motsvarande hylsa
[Energiförbrukning]
Hej stråle : 30W
Låg stråle : 20W
* Bild # 4 av produkten är som referens.
* Denna produkt är för 12 DC negativ vanlig. Var noga med att hålla fast vid ledningar med 12 VDC ström.
* Montera inte det, eftersom det inte motsvarar många AC-belysningsstrålkastare till små motordrivna fordon.
* Den negativa vanliga hänvisar till typen där den negativa sidan av strålkastarledningarna är vanligt på höger strålsidan och Ljusstrålsidan. Det motsvarar inte fordonet för positiv gemensam strålkastare.
* Denna produkt är till motorcykel så den är inte användbar för 4-hjuligt fordon.
* Tänd det inte nära papper eller tyg eller nära ett brandfarligt föremål. Det kan orsaka brand eller onormal uppvärmning. Tänd inte heller nära brandfarliga sprayer, tunnare och liknande. och nära det brännbara objektet eller saker som kan fånga eld.
* Vänligen fäst inte på strålkastaren i upplyst läge. Det kan orsaka funktionsfel eller brinna.
* Denna produkt är vattentät men inte helt vattentät. Vänligen rulla vinylband eller självhäftande tejp, eller vattentät behandling med tätningsmedel mm. för kopplaren som lämnar kontrollenheten. Undvik att bli våt med vatten.
* Använd inte högtryckstvätt direkt på denna produkt under biltvätt med högtryckstvättmaskin.
* Vänligen tappa inte LED-lampan eller kontrollenheten eller ge en stark chock. Det kommer inte bara att förkorta livslängden utan också orsaka skador på grund av skador och försämring av prestandan.
* Använd alltid det medföljande kiselfettet till LED-lampan under installationen. Vänligen se denna handbok för detaljer.
* Rör inte LED-chipet när det är avstängt eller tänt.
* Täck inte den vattentäta kylfläkten. Se till att det finns tillräckligt med utrymme för att sugluften ska flöda på baksidan av fläkten.
* Orienteringen är angiven under installationen för den vattentäta kylfläkten. Var noga med att installera en silver runt tätning vänd utåt.
* Använd skruvlås för att förhindra att skruven lossnar. Dessutom, dra åt det regelbundet.
* Installationen kräver speciell kunskap och skicklighet. Vänligen gör det med kvalificerad mekanik och skicklighet.
* Se till att justera den optiska axeln innan du använder den. Det hindrar synligheten för inkommande fordon och kan orsaka trafikolyckor. För mer information hänvisas till vägtrafikfordons säkerhetsstandard.
* Det finns fall där garantin från fordonstillverkaren inte kan erhållas genom att installera den här produkten.
* Företaget tar inget ansvar med tanke på skadorna, vilket har fel och olycksfallsrisk genom att använda denna produkt. Observera dessutom att företaget inte tar något ansvar för desorptionsavgifter och andra kostnader som uppstår vid utbyte.
* Kontakta din återförsäljare eller PROTECH SERVICE DIVISION om du känner av abnormitet under installation eller användning.
●Rated voltage: 12v AC-DC dual use
●Specifications: 6000k
●Type: PH7
●Components: With socket harness for HS5 type
[Power consumption]
・Hi beam: 30W
・Lo beam: 20w
*Image 4 is for reference only.
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.