Uppställning av fyra typer av standardhattskruvar : rak typ, låg huvud typ, extra låg huvud typ, avsmalnande typ.
Huvudet visar en vacker finish genom smide och skärning.
• Hot Smide / skärande / rullande bearbetning
ZETA titanprodukter kännetecknas av en enkel design som inte gör extra dekorationsbehandling. Det betonar den inneboende syftet med titan och det finns ingen onödig behandling. Det skär inte bara titanmedlet men har en draghållfasthet som överstiger materialstyrkan genom att använda en smidigt tillverkningsmetod. Huvudet säkerställer optimal kvalitet genom precisionsskärning och det leder också till ytterligare lättvikt genom att designa den enstorlek på grund av höghållfast material. Det rullade gängade partiet härdas genom plastisk deformation, så det är 1,5 gånger starkare än skärtråden. (Det rekommenderas att använda skrapmedel.)
• Det antar 64 titan.
Det är allmänt känt i landet som "64 titan", men det kallas "ASTM B 348 Gr 5" (betyg 5) i den amerikanska ASTM-standarden. Det betyder att aluminium (AL) 6% och vanadin (V) 4% finns i massfraktion eftersom notationen av Ti-6 AL-4 V specificerar kemiska komponenter. Den är allmänt känd och används som en medicinsk metall som ett implantat, ett konstgjort ben och etc. Dessutom används det för flygplan, rymdindustrin, kärnkraftsindustrin, industriell turbin, bil / motorcykel ljuddämpare, golf club head etc på grund av sin styrka. 64 titanlegering upptar 70% av hela titanlegeringen, den vanligaste legeringen.
[Lättvikt] Den har en tyngdkraft på ca 4,5. Det är halvvägs mellan järn 7,8 och aluminium 2,8. (Vikt av 55 till 60% av järn)
[Hög styrka] Den har en draghållfasthet på 900 N / mm 2 eller mer, jämförbar med 930 N / mm 2 SCM 435 (krommolybdenstål).
[Inte rostigt] Det försämras inte semipermanent eftersom det bildar en passiv film på ytan.
[Människor och miljövänliga] Det används också som ett implantat eller ett artificiellt ben eftersom det inte finns något behov av att du oroar dig för metallallergi. Dessutom är det möjligt att återvinna.
[Vackert] Den används också som en dekorativ produkt eftersom den är utmärkt i korrosionsbeständighet.
[Behandlingsproblem] Högteknologi krävs för skärning, pressgjutning och svetsning.
[Högt pris] Bortsett från det är en sällsynt metall, det vill också ta tid att förfina och bearbeta eftersom det är svårt.
[med bränt / gallande] Det är svagt mot friktion, och det kommer sannolikt att gripa och gnälla sig.
• Den jämför titans styrka med andra metaller.
OEM Titanium : Det är billigare än andra titanlegeringar. Det kännetecknas av låg korrosionsbeständighet men låg styrka.
a-legering : Det är utmärkt i krypmotstånd (deformationshastighet mot stress under lång tid). Den är utmärkt vid svetsarbeten, men dess bearbetbarhet är dålig.
p legering : Bland titanlegeringar har den högsta styrkan. Det är utmärkt i bearbetbarhet, men produktionskostnaden är mycket hög.
a-p legering : Den har hög hållfasthet, duktilitet, seghet och utmärkt bearbetbarhet. ZETA titanprodukt använder a-p legering Ti-6AL-4V.
Four types of standard cap bolts are available: straight type, low head type, extra low head type, and tapered type.
The head is forged and machined for a beautiful finish.
●Hot forging, machining, and component rolling
ZETA titanium products feature a simple design with no unnecessary decorative processing.It focuses on the original purpose of titanium, and there is no unnecessary processing.Not only cutting titanium parts, but also hot forging process is applied to achieve tensile strength that exceeds material strength.The head is precision machined to ensure optimum quality, and because of the high strength of the material, it can be designed one size smaller to further reduce weight.Since the threaded part is hardened by plastic deformation, it is 1.5 times stronger than the machined thread.(The use of anti-galling agent is recommended)
●64 titanium is used
In Japan, it is commonly called "64 titanium", but in the U.S. ASTM standard calls it "ASTM B348 Gr5" (Grade 5).The notation "Ti-6AL-4V" specifies the chemical composition, which means that 6% aluminum (AL) and 4% vanadium (V) are contained in the mass fraction.It is widely recognized and used as a medical metal for implants, artificial bones, etc.Because of its strength, it is used in aircraft, space industry, nuclear industry, industrial turbines, automobile and motorcycle exhausts, and golf club heads.64 titanium alloy is the most commonly used alloy, accounting for 70% of all titanium alloys.
[Lightweight] Specific gravity is about 4.5.Intermediate between iron 7.8 and aluminum 2.8.(55-60% weight of iron)
[High strength] Tensile strength is more than 900N/m㎡ and is comparable to 930N/m㎡ of SCM435 (chromium molybdenum steel).
[Rustproof] No semi-permanent deterioration due to the formation of a passive film on the surface.
[Friendly to people and the environment] It is also used as an implant and artificial bone because it is free from metal allergy.It is also recyclable.
[beautiful] It is also used as an ornament because of its excellent corrosion resistance.
[Difficult to process] High technology is required for machining, press-forming and welding.
[High price] In addition to being a rare metal, it takes time to refine and is difficult to process.
[Seizure and galling] Weak against friction and prone to seizure and galling.
●Comparison in Strength between types of titanium and other Metals
Pure titanium: It is less expensive than other titanium alloys.Excellent in corrosion resistance but low in strength.
α alloy: Excellent in creep resistance (deformation rate against stress for a long time).Excellent in welding work, but poor in workability.
β alloy: It has the highest strength among the titanium alloys.It has excellent processability, but the production cost is very high.
α-β alloy: It has high strength, ductility and toughness, and excellent workability.ZETA titanium products are made of Ti- AI-4V with alpha-beta alloy.