Reason for purchasing
For the power up of LITTLE CUB.
I was thinking of changing the Carburetor to a Large diameter to match the High Compression Piston and High Camshaft replacement.:I chose the Set because it was relatively inexpensive.
I was torn between the PC20 and this PB16, but I figured if I kept the 50cc, this PB16 would be easier to handle.
?attachment
It is not so difficult to remove the Normal Carburetor and replace it with this PB16 as per the manual attached.
I didn't have to worry about any processing.
The OEM Carburetor has a special construction that also attaches the Fuel Cock to the body, but since the PB16 of this kit has the same construction, the work proceeded without hesitation.
It was easy to replace the Manifold with the NORMAL one.
Chalk can also use the OEM as is.
However, since the carburetor setting is required depending on the vehicle and the parts installed, several types of Jet are available in the Quantity:It is a good idea to buy both Throw and Main at the same time in a Set.
Standard Quantity:The one in the Set was designed to be bored up to about 80cc.
Impressions of running
I am very happy with the high compression piston and the high camshaft.
The torque is not so thickened and the lower rpm is the same, but the acceleration feeling in the mid-high rpm range is obviously much better.
The legal speed limit for mopeds can be exceeded in no time, so I felt I needed to be careful when using it on public roads.
Also, depending on the year, the NORMAL is equipped with the CarburetorHeater, but the PB16 of this kit does not have the installation point, so you need to be careful if you are driving in cold areas.
If you need a Carburetor Heater and want a Large diameter, you may want to consider the CUB90 OEM Carburetor diversion.
- Instock
1,349.53 SEK (20,741 JPY)
Leveransinformation
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
Montering
-
LITTLE CUB
AA01-3000001-
-
SUPER CUB 50
C50-0200001- 12V
-
LITTLE CUB
C50-4300001-
-
SUPER CUB 50
AA01-1000001- 12V
Produktdetalj
*- Det är nödvändigt att ställa in förgasaren enligt de delar som används. Se till att inställningarna är lämpliga för din motor.
- Denna produkt är endast avsedd för S-scenen. (Lager topplock)
- Installationsanvisningarna i denna handbok baseras på standardmodellen. För modeller med en förgasarvärmare kan förgasaren inte användas. Om din modell är utrustad med en förgasarvärmare, vänligen isolera sladden, sätt ihop ledningarna på en plats där de inte stör och kläm fast dem.
- Denna bruksanvisning är avsedd för personer med grundläggande färdigheter och kunskaper. Om du inte har erfarenhet av installation eller inte har nödvändiga verktyg, installera inte produkten och be en utsedd eller certifierad fabrik att installera den.
- Denna produkt är endast för modeller med listade modell- och ramnummer. Den kan inte installeras på någon annan modell..
[Komponenter]
Förgasare Assy. x 1 (03-03-0073)
Huvudstråle (# 90) x 1 (00-03-0043)
SLOW JET (# 38) x 1 (00-03-0179)
Spjällkabel COMP. (710mm) x 1 (09-02-0071)
Insugningsrör x 1
Inloppsrörspackning x 1 (16229-GEY-T01)
Insugningsrörspackning x 1 (91301-181-T01)
Hylskruv (6X20) x 2 (00-00-0043)
Hylskruv (6X22) x 2 (00-00-0620)
L-skiftnyckel (5mm) x 1
[Dokument]
Manuell :japansk
[Online katalog]
SP Takegawas onlinekatalog (Japanska).
Varning
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Recensioner
Reviews with image
Fits:HONDA SUPER CUB 50 C50-0200001- 12V, HONDA SUPER CUB 50 AA01-1000001- 12V, HONDA LITTLE CUB AA01-3000001-, HONDA LITTLE CUB C50-4300001-
Oct 5, 2020
Just the right amount of power
Fits:HONDA SUPER CUB 50 C50-0200001- 12V, HONDA SUPER CUB 50 AA01-1000001- 12V, HONDA LITTLE CUB AA01-3000001-, HONDA LITTLE CUB C50-4300001-
Jul 13, 2017
I recommend you after Bore up.
Bore up LITTLE CUB to 80 cc and put High Camshaft. Sprocket also changed to 15T. I still purchased this carburetor because the Speed ??I was thinking did not come out.
When I replaced it with Jet which was attached to it, I got a surprising change. Large I'm satisfied..
Fits:HONDA SUPER CUB 50 C50-0200001- 12V, HONDA SUPER CUB 50 AA01-1000001- 12V, HONDA LITTLE CUB AA01-3000001-, HONDA LITTLE CUB C50-4300001-
Jul 29, 2016
SUPER CUB became easy to ride.
When I Bore up CUBC 50 to 75, I was thinking about PC 20 but I decided to PB 16 of Mukawa who seems to be able to attach a pon because it is not good at burning! As I thought, the installation was very Smooth. I was wondering if I installed the built-in Main jet # 75 for # 90? Although I was wondering, I noticed immediately after driving I did not turn to high rpm! If I changed to # 90 and ran again, I will go to Smooth. Torque also ups and it got easier to ride! I think that the fuel is good as well! It is the carburetor of Recommendation.
New Custom Articles
