Typ : Spegel M10 Klämma
Ingår Delar : Extension Wire Code 1200mm, Key 2st.
Den kan monteras till vänster och höger.
* Observera att det finns fall där en del av produkten på det bifogade fotot inte är en produkt av DAYTONA.
* Det är en produkt som undertrycker stöld och olycka, och det garanterar inte fullständig stöldförebyggande. Det rekommenderas att använda det med andra stöldskydd.
* Observera med stöld, förlust, hängande delar, skador, uppdelning av delar i den här produkten eftersom det inte alls kan garanteras.
* Vänligen notera för den förlorade av nyckeln eftersom det inte finns några reparationsinställningar för nyckeln. (med nyckel x2pcs.)
* Använd fett och liknande för underhåll om nyckeln inte kan fungera smidigt på grund av regnspåverkan och etc.
* Det motsvarar barstypspegeln M10. (* Det motsvarar även barstypspegeln M8 genom att köpa burringbrickan (78032) separat.)
* Det är möjligt att välja i 2-position för hjälmhållarens kroppsinstallation. (* Det finns fall där det är omöjligt att använda i 1 position beroende på fordonet.)
* Det finns fall att det kan vara symmetriskt utformat, beroende på att bilen kan monteras på båda sidor.
* Det är med en förlängd ledningsledning 1200mm. Det är också möjligt att undertrycka jackstöld om du inte når hjälmen eller skickar den jacka som du tar av.
* Det är inte monterbart för fordonet vars spegelfäste är lägre än kappytan, som skoter och så vidare.
MT-09 är nödvändig för att vända med spegeln till höger bara på höger sida.
* Produkten på något foto är GSX-S1000.
Type: Mirror M10 Clamp
Components: Extension wire cord 1200mm, 2 keys
This product can be mounted on right or left
*Some of the images of the installation examples include items that are not handled by DAYTONA.
*This product is intended to inhibit theft and mischief, and does not guarantee complete theft protection.It is recommended to use with other anti-theft products.
*We do not guarantee any theft, loss, dropout, damage or failure of the items attached to this product.
*Please be careful not to lose the key as it is not available for repair.(2 keys included)
*If the key does not work smoothly due to rain or other factors, use a lubricant to maintain it.
*Compatible with bar type mirror M10.(*Bar type mirror M8 is also available by purchasing Bar Ring Washer (78032) separately)
*Two positions can be selected by mounting direction of the helmet holder body.(*On some models, only one position can be used)
*Symmetrical design, may fit both left and right depending on the model.
*Extension wire cord 1200mm included.If the helmet is out of reach or the jacket is removed, you can not prevent the theft of the jacket.
*This product cannot be installed on scooters and other vehicles where the mounting surface of the mirror is lower than the cowl surface.
*On MT-09, right side only, it is necessary to turn together with the mirror when installing.
*Some images show GSX-S1000.
*The mirror adapter with shock absorber (99784 / 99785) must be installed at the same time.(*Turners are also to be removed.)
*There may be changes in product specifications due to the manufacturer's reasons.