Det är en sub-dator utvecklad för att göra JetSetting i Carburetor-bil med FI Vehicles.
DAEG och CB1300etc. S FOR JAPAN MODEL exklusiv MODEL har ingen dedikerad Sub-dator alls, men det är allt i linje FORUPAN KODA MODEL producerat Lineup som är unik för SPECIAL Knife Agents.
VTR 250, NINJA 2 Hjälm 50R innehåller också funktioner för att slåss mot klasser som är nybildade i varje krets.
Även om den i viss utsträckning kan sättas in med den bifogade omkopplaren, är PCCommunication Adapter också inställd för mer detaljerad inställning.
Förutom att justera bränsleinsprutningsbeloppet har det också följande funktioner, så det är effektivt för Race som görs i Mogi och Suzuka.
? Shifter funktion
Skiftning kan utföras med Axel helt öppen. Du kan ställa in bränsleavbrottstid under Shifter-drift.
? Subbegränsare funktion
Förutom den ursprungliga rotationsbegränsaren har den en funktion för att undertrycka rotationsökningen. Den kan användas för PITRoadLimiteretc.
? Överrev kompatibel funktion
Vad gäller VTR, installerar du Rev limiter med + 500 varv per minut.
? Med grundläggande karta
Grundläggande karta i fraktstaten (För S / O och full EX) Eftersom den bär, är det möjligt att springa omedelbart efter installationen.
? Kropp, Harness, med justeringsbrytare ingår
? Grundinställningen kan ställas in med medföljande strömbrytare
? För varje bil endast med Harness
It is a performance chip developed to perform the jet setting of a carburetor vehicle on a FI vehicle.
DAEG, CB1300 and other Japanese exclusive models have no special performance chip, but this is the lineup of special agent which is produced all in Japan.
The VTR250 and NINJA250R are also equipped with features to compete in the newly established classes at each circuit.
It is possible to set it with the attached switch to some extent, but for more detailed setting, the PC communication adapter is also set.
It is useful for the races held in Motegi and Suzuka because it is equipped with the following functions as well as the adjustment of the fuel injection rate.
・Shifter function
It is equipped with a function that allows the driver to shift with the accelerator fully open.The fuel cutoff time when the shifter is activated can be set.
・Sub-limiter function
In addition to the original rotation limiter, a function to suppress the increase in rotation is installed.It can be used for PIT load limiter.
・Over-rev function
For VTR only, it raises the rev limiter by +500RPM just by installing it.
・Includes a basic map
The basic map (for S / O and Full EX) is included in the shipment, so you can start driving immediately after installation.
・Includes main unit, harness, and switch for adjustment
・Basic settings can be made with the attached switch
・Harness for each vehicle is included.