Swingarm vikt : NORMAL 3,5 kg → 1,8 kg (*)
För materialet Swing Arm, använd 7N01-material av aluminium, 1,8 kg mot 3,5 kg OEMSwing Arm (*) Den är lätt och har hög styvhet och förbättrar funktionen av motorcykel med viktminskning under våren.
Det finns tre typer av inställningar : Rörform Standard, Trippel kvadrat, Trippel kvadrat miniPipe. Det finns också Stubby, No Stubby kan väljas, 18 typer med 3 olika längder.
(*) = Bil : GROM / Rörtyp : Triple Square / Ingen Stubby / + 0cm
■ Alternativ Beskrivning
[Alternativ 1] KedjeskärareBoltstopp Spec. (GCraft artikelnummer : 60228) +1000 yen
Byt kedjeledare från nitstopp till bultstopp. Lätt att byta ut när den är sliten.
[Alternativ2] Pivot-avdelning Nålförändring (GCraft-produktnummer : 60187) +5000 yen
Om det är normalt, kommer vi att göra Pivot-delen av Bush använda Needle Bearing bearbetad.
[Alternativ3] Stand HookBase (M6) Ytterligare bearbetning (GCraft artikelnummer : 60903) +3000 yen
GCraft gjorde stånghake eller utanför företaget gjort stånghaka, (M6) Du kan installera.
[Alternativ4] Fordonshöjdsjusteringstyp fjädring Monteringsfunktionstilläggshantering (GCraft-produktnummer : 60057) +5000 yen
Vi byter till upphängning som mottas med fordonets höjdjusteringsfunktion med vertikal inställningsbredd på 7,5 mm.
Genom att flytta delen av berget kan du enkelt ändra bakens bilhöjd. * NSR50 / Bakre chock Exxive Design för 80.
[Option5] Racing Stand HookSpec.OWTypeChain dragprocess (GCraft produktnummer : 60188) +5000 yen
Genom att bearbeta kedjebilddelen av Taper eliminerade vi övre och nedre luckorna på axelaxeln.
Eftersom det bearbetade stycket rör sig, finns det inga övre och nedre luckor. Det är en mekanism som också antas av Swing Arm of Big bike.
GCraftProductNo : Du kan installera Racing Stand Hook.
* GCraftProductNo : 33170APLockheed caliperSupport inte monteras (Och störningar)
NSR50/80 wheels can be installed.
Swingarm Weight: Stock 3.5kg to 1.8kg (*)
The swingarm is made of aluminum 7N01 material, which is 1.8kg (*) lighter than stock swingarm 3.5kg, and has high rigidity, which improves the operability of the motorcycle by reducing the unsprung weight.
There are three types of pipe shapes: Standard, Triple Square and Triple Square Mini Pipe.It can be selected with or without stabilization, and 18 types of 3 different lengths are set.
(*) = bike type: GROM / Pipe Type: Triple Square / No Stabilizer / +0cm
■Option Description
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Needle bearing change at pivot (G-Craft part number: 60187) +5000yen
The pivot part that normally uses bushings is converted to needle bearings.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Ride height adjustable suspension mount function addition processing (G-Craft part number: 60057)
It is changed to the suspension receiver with the height adjustment function of 7.5mm.
By moving the mountain part, you can easily change the rear ride height.*Exclusively designed for NSR50 / 80 rear shock.
[Option 5] Racing stand hook specification OW type chain puller processing (G-Craft part number: 60188)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Craft Part Number: 33170AP Lockheed caliper support cannot be installed (will interfere)