Vattentemperaturkorrespondens (-19,5 till 99,9 grader)
[Produktinnehåll]
Kompakt Temp Meter Body x 1pc.
termistor (R1 / 8 avsmalnande skruvgivare) x 1pc.
Thermistor gemensamma kabel (Ungefär 1.000mm) x 1pc.
kardborreband (25mm x 55mm) x 1pc.
Reservbatteri (LR44Type) x 1pc.
Bruksanvisning x 1pc.
med brusfiltret
* Kan inte användas som oljetemperaturmätare.
* Inget bakljus, klockfunktioner.
* Har inte bakljusfunktion eller klockfunktion.
* Vattentemperaturvisning av vissa modeller kommer inte att vara stabil om inte brusfiltret filtreras (63847) är installerad.
* Observera att användbar termistor (fastställt resistansvärde) kommer att skilja sig åt beroende på produkt.
Åtdragningsmomentet för termistoren (R1 / 8 konisk skruvgivare) är 10-13,5 Nm.
* Om du ska återanvända termistoren (R1 / 8 konisk skruvgivare) , se till att du använder en ny tätningstejp.
* Om denna produkt används i uppvärmt tillstånd, som på sommardagar, kan den flytande kristallpanelen bli svart. Detta händer när temperaturen på panelen överstiger dess tillåtna intervall och kommer att lösas om temperaturen på mätkroppen är nedkyld.
* Kommer inte med brusfiltret.
* De tillämpliga modellerna är när de används som vattentemperaturmätare. Byt sensorn som är ansluten till produkten med den äkta sensorn.
* Observera att installationsplatsen för HONDA HORNET600 kommer att bli bakre delen av cylinderhuvudet.
Water temperature support (-19.5 to 99.9 degrees)
[Product Description]
・Compact balance meter body x 1
・Thermistor (R1/8 taper screw sensor) x 1
・Thermistor joint cable (approx. 1.000mm) x 1
・Velcro (25mm x 55mm) x 1
・Spare button battery (LR44 type) x 1
・User's Manual x 1
With noise cut filter
*Not for use as an oil thermometer.
*No backlight function, no clock function.
*In some vehicles, the water temperature display may not be stable unless a noise cut filter (63487) is installed.
*The thermistor (setting resistance value) that can be used differs depending on the product.
*Tightening torque for thermistor (R1 / 8 taper screw sensor) is 10-13.5N-m.
*When reusing and installing the thermistor (R1 / 8 taper thread sensor), be sure to use a new sealing tape.
*If this product is used under the hot sun in the summer, the LCD panel may turn black.This phenomenon occurs when the temperature of the LCD panel exceeds the allowable temperature, and can be solved by lowering the temperature of the meter itself.
*Compatible models are for use as a water temperature gauge.Replace the sensor supplied with the product with the stock sensor.
*Only HONDA HORNET600 is installed at the rear of the cylinder head.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.