- Passar:
- SUZUKI GSX250R 18-21 *A separate Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI V-STROM650 07-09|12|14-19 DL650/K7/K8/K9/L2/L4/L5/L6/L7/L8/L9 *If you have Kijima throttle pipe part number 201-5371 separately
- it will be useful for installation.
- SUZUKI GSX-S1000 17-18 L7/L8 *Special Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI GSX-R750 08-09|11-19 K8/K9/L1/L2/L3/L4/L5/L6/L7/L8/L9 *If Kijima throttle pipe part number 201-5371 is separately available for installation
- ...och mer.
This is 3rd time i use Kijima grip heater.
I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without ad...Läs mer - Passar:
- Others Universal
- HONDA CB1100SF 00-01 [Model]X11
- HONDA CB125R 18 [Model]JC79-100
- HONDA CB1300 SUPER FOUR 05
- HONDA CB1300SB 14-19 [Model]SC54 AE
- ...och mer.
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance.Läs mer - Passar:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...och mer.
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!
I have good luck with most all webike products.
I purchased 1 of these along with the associated heated lock...Läs mer - Passar:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...och mer.
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful
I'm willing to install it on my other bike.Läs mer - Passar:
- YAMAHA XT250X 06-16
- YAMAHA SEROW225 89-18
- YAMAHA SEROW250 89-18
- YAMAHA Tricker 00-17
- YAMAHA WR250X ALL MODEL
- ...och mer.
Very good throttle. Bought the fast throttle and it's really require small turn to have a blast. Reduce so much wrist movement.Läs mer - Passar:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...och mer.
Second time use kijima heated grip. I used gh08 last time and this time gh10.
It is quite easy for install and internal switch makes handle bar clean.
Highly recommend this heated grip.Läs mer - Passar:
- YAMAHA Bronco. 97
- YAMAHA Tricker (XG250) Model: 5XT1-B 04-14
- YAMAHA Tricker (XG250) Model: 5XT1-A 04-14
- YAMAHA Tricker (XG250) Model: 5XT1-9 04-14
- YAMAHA CELLO 250 S Model: 3C56|C|M|Y|S Frame Number: DG17J 08-12
- ...och mer.
This K-PIT clutch lever look awesome, same as OEM one made by KITACO.Product price is so cheap than the Genuine OEM but the Quality is the same .I'm going to install this new clutch lever on my 1987 T...Läs mer - Passar:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...och mer.
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The materia...Läs mer - Passar:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...och mer.
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heati...Läs mer - Passar:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...och mer.
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
It goes well with the blue w800.
I'm very satisfied with the harmonious color.
The grip is moderate and not slippery.
It became a better w800 with a uniq...Läs mer - Passar:
- HONDA
- HONDA
- HONDA
- KAWASAKI
- KAWASAKI
- ...och mer.
저는 20년식 가와사키 W800을 타고 있습니다.
기존 화이트 그립이 고무 소재로 인해 때가 타는 문제가 있어, 광택이 있는 플라스틱 소재를 찾고 있었습니다.
소재는 만족스럽지만, 핸들에 비해 그립이 상대적으로 짧습니다.
구매 시, 이점 참고하시기 바랍니다. 저는 그냥 사용하고 있습니다. Läs mer - Passar:
- SUZUKI V-STROM 650 07-09 (Model DL650 K7
- K8
- K9
- L2
- L4
- ...och mer.
这款我在webike购买的KIJIMA(田岛)VANS × CULT 7/8”握把套,安装在我的川崎Ninja ZX-6R上很合适,这是一款联名的握把套,结合VANS经典纹路,抓握很舒适。Läs mer - Passar:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (with side numbers) *Processing of switch holes required
- SUZUKI GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- ...och mer.
2012년 CB1100 의 순정 대체품으로 허리케인 유로피언 타입3 핸들바를 장착하였습니다.
개인적인 생각으로 혼다 순정품보다 더 퀄리티가 좋다고 생각했습니다. 다만, 스위치의 구멍의 위치를 선정하는 것이 조금 어려웠습니다.
가장 안심이 되었던 것은 케이블의 교환 없이 설치가 가능한 점입니다. 교환 후에 포지션도 더 편하고 강력하게 추천합니다.Läs mer - Passar:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
- ...och mer.
Hurricane Tracker Special Handlebar makes for a really good stock replacement bar.Today I Installed Hurricane handlebar on my TDub. Premium Quality Handlebar Right here.finishing quality is awesome .W...Läs mer - Passar:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...och mer.
我的摩托是YAMAHA XMAX300,一直都想改装一款加热手把,在别的网站上害怕买到不好的产品,所以我在webike上购买了这款KIJIMA加热手把,这款加热手把支持各种型号的摩托安装,安装简便,需要注意的是需要专业人士接线。实际体验后加热效果很好。Läs mer - Passar:
- YAMAHA TW225 91-22
- YAMAHA TRICKER 04-18
- YAMAHA TW200 91-22
- YAMAHA DT230LANZA 97-99
- YAMAHA DT125R 88-99
- ...och mer.
Overall I am quite happy with this brake lever. It was hard to determine comparability but after some research I can confirm that these K-type levers are compatable with the Yamaha XT-250/ Serrow 250 ...Läs mer - Passar:
- KAWASAKI KH250 ALL MODEL
- HONDA Silver wing(ALL MODEL)
- HONDA Night Hawk(ALL MODEL)
- HONDA DIO(ALL MODEL)
- HONDA CREA(ALL MODEL)
- ...och mer.
Recieved these grips quickly, I am in the United States. Excellent quality and feel great in your hand. Will buy more in the future. Läs mer - Passar:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...och mer.
these steel ball bearing look same as OEM. Buy with confident because IT'S MADE IN JAPAN.. My TW200 had 70k Kilometers done. I replaced my bike ball bearing at 40000km,after that never touched the bea...Läs mer - Passar:
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50S/BA50ST [Type]4KN2/4KN3
- YAMAHA GEAR (GEAR) 4KN [Genuine part number]93501-04011 19 [Model name]BA50 [Type]4KN1
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN6/3LN7
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN3/3LN5
- YAMAHA FZR250R 3LN [Genuine Part Number]93501-04011 38(Top and Bottom combined) [Model Name]FZR250R [Type]3LN1
- ...och mer.
As I was already replacing the old worn parts for the foot rests, I decided to go for these non genuine ones as they are just ball bearings and I needed a few.
Very well made, exact to specifications...Läs mer - Passar:
- YAMAHA FZ09 14-21 [Model]FZ09ECR/ECO/EGY/EO/HCW/HW/HCR/FGY/GCGY/GCL/GCB/GB/ER/ECGY/FS/FY/HS/HCS/HR/GL/GGY
- YAMAHA FZ1 01-14 [Model]FZS1000N/FZS10ZCR/ACS/10E/0VC/1T/SPR/R/0D/BCW/YL/ZCB/PC/YG/EW/1S/SC/0V/0W/ZR/EC/DC/AS/TC/XCGY/YCG/P/C/RC/YCL/ZB
- YAMAHA FZ10 17-21 [Model]FZ10HCGY/HB/HGY/HCB
- YAMAHA FZ6 04-09 [Model]FZS6YCB/XCB/T/W/V/TC/YL/SSC/SS/SS/YB/YCL
- YAMAHA FZ6R 09-13|15-17 [Model]FZ6RYY/YCL/ZR/ZCL/AO/GCB/DL/HS/BCW/HCS/GB/ZCB/ZL/BCB/DCW/YCB/YW/FR/ACB/ACO/YCY/ZCR/ZW/DW/BW/YCW/YB/YL/ZB/ZCW
- ...och mer.
It was purchased for use on the XSR900, but was not used in the end, and the STD Mounted Product Grip was taken and used.Reasons for not using it includeLength is 5mm shorter than OEM ProductThere is ...Läs mer
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING