- Passar:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...och mer.
I put Kijima blade breeder dust cap on my Ducati StreetFighter 1098 and Hayabusa 1300R replacement for stock cap (Hayabusa with Brembo caliper). The stock cap is easy to lose when repalce bracke fruid...Läs mer - Passar:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...och mer.
我的摩托车是YAMAHA NMAX155,我在上次更换刹车油的时候把原厂的放空气橡皮冒弄坏了一直没有地方能买到,直到我在webike看到这个KIJIMA 放空气螺丝橡皮盖,这是一款通用的配件,适合大部分摩托车,红色的还比较好看。Läs mer - Passar:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...och mer.
Works better than NORMAL.OEM Brake hose was too short to use.Läs mer - Passar:
- SUZUKI V-Strom 650 ABS VP56A [Genuine part number]59102-33870/59302-33850 RH/LH [Model name]DL650AL3/DL650AL4/DL650AL5/DL650XAL5/DL650AL6/DL650XAL6
- SUZUKI V-Strom 650 ABS C733A [Genuine part number]59102-33870/59302-33850 RH/LH [Model name]DL650AL8/DL650XAL8
- SUZUKI Volty Type T (Volty Type T) NJ47A [Genuine part number]59301-33840 [Model name]TU250XT-Y
- SUZUKI Volty Type T (Volty Type T) NJ47A [Genuine part number]59301-33840 [Model name]TU250XT-X
- SUZUKI Volty typeT NJ47A [Genuine part number]59301-33840 [Model name]TU250Y/TU250K2
- ...och mer.
The touch is softer, but it works well and there are no problems with breaking. I think it is a product that can be recommended.Läs mer - Passar:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...och mer.
Great product and quick delivery a pleasure to deal with, highly recommend. Great service from Webike Japan the product arrived to Australia in a few days, very happy!Läs mer - Passar:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...och mer.
Good quality. Very fast delivery. If anyone looking for some retro style, cool looking master cylinder, this is the right one. Läs mer - Passar:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...och mer.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Läs mer - Passar:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...och mer.
I used it on my DAYTONA air breeder, but it's too loose. I don't think it will come off while driving, but it's loose enough to prevent dust and dirt. The OEM breeder is not as loose as the DAYTONA, b...Läs mer - Passar:
- SUZUKI V-Strom 650 ABS VP56A [Genuine part number]59102-33870/59302-33850 RH/LH [Model name]DL650AL3/DL650AL4/DL650AL5/DL650XAL5/DL650AL6/DL650XAL6
- SUZUKI V-Strom 650 ABS C733A [Genuine part number]59102-33870/59302-33850 RH/LH [Model name]DL650AL8/DL650XAL8
- SUZUKI Volty Type T (Volty Type T) NJ47A [Genuine part number]59301-33840 [Model name]TU250XT-Y
- SUZUKI Volty Type T (Volty Type T) NJ47A [Genuine part number]59301-33840 [Model name]TU250XT-X
- SUZUKI Volty typeT NJ47A [Genuine part number]59301-33840 [Model name]TU250Y/TU250K2
- ...och mer.
I also put in front brake. Front and rear NTB made.[How is it used?What? Are you sure you want to use Motorcycle?Normal use on public roads (shopping, wandering, etc.)It is far from Fading even in the...Läs mer - Passar:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...och mer.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Läs mer - Passar:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...och mer.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. ...Läs mer - Passar:
- SUZUKI GRASSTRACKER BIG BOY 10 [Model]TU250GBZL0[FNO.]NJ4DA-100001-[Number of disks] Single disk [Location of use] Front
- SUZUKI GRASSTRACKER BIG BOY 09-10 [Model]TU250GBK9/GBL0[FNO.]NJ4DA-100001-[Number of discs]Single disc[Location of use]Front
- SUZUKI GRASSTRACKER BIG BOY 04- [Model]TU250GBK4/GBK5/GBK6/GBK7[FNO.]NJ4BA-100001-[Number of disks] Single disk[Location of use] Front
- SUZUKI GRASSTRACKER BIG BOY 01-03 [Model]TU250GBK1/GBK2/GBK3[FNO.]NJ47A-123277-[Number of discs]Single disc[Location of use]Front
- SUZUKI ST250 E-TYPE 08-14 [Model]ST250XK8/XK9[FNO.]NJ4CA-100001-[Number of discs]Single disc[Location]Front
- ...och mer.
This is the Brake Pads of PinSlide type 2POT for Caliper made by TOKICO.I installed it on my Kawasaki Zr-7S.Unlike the Opposite Caliper, the Brake Pads are asymmetrical, and the Piston side and Wheel ...Läs mer - Passar:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...och mer.
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to b...Läs mer - Passar:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...och mer.
Suitable for Handlebar with lowered Grip end.The Lever touch is also perfect, and the subtle Release operation can be performed without a sense of tension.I felt it.Compared to the separate type, the ...Läs mer - Passar:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...och mer.
I bought this as a replacement from OEMvery high (Lol) Expensive for nothing. (Lol)The color of 64Titanium material of the same size is SilverTitanium and about 1000 yen.Quantity Stainless this time:2...Läs mer - Passar:
- SUZUKI VOLTY 99-04 [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI GLADIUS650400 10-11 SFV400A[No. of use/disc]Front/Double disc [Compatibility]◎
- SUZUKI BANDIT250 95-98 /V/XZ [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI SKYWAVE400 burgman 11-16 AN400 L1-L6 LTD ABS[Application Areas/Discs]Front/Double Disc [Compatibility
- SUZUKI GLADIUS650650 09-10 SFV650 [Position/Number of discs] Front/Double disc [Compatibility
- ...och mer.
I installed it on my ZEPHYR1100 which has a heavy body. I think Brake is good for the price.Läs mer - Passar:
- SUZUKI VOLTY 99-04 [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI GLADIUS650400 10-11 SFV400A[No. of use/disc]Front/Double disc [Compatibility]◎
- SUZUKI BANDIT250 95-98 /V/XZ [Position/Number of discs] Front/Single disc [Compatibility
- SUZUKI SKYWAVE400 burgman 11-16 AN400 L1-L6 LTD ABS[Application Areas/Discs]Front/Double Disc [Compatibility
- SUZUKI GLADIUS650650 09-10 SFV650 [Position/Number of discs] Front/Double disc [Compatibility
- ...och mer.
It takes a little longer to nurse, but it works well.I just don't think it's as good as the description.Läs mer - Passar:
- SUZUKI DL1000 V-Strom 02-12
- SUZUKI DL1000 V-Strom 02-09
- SUZUKI DL1000 V-Strom Adventure 12
- SUZUKI DL650 V-Strom 04-09
- SUZUKI DL650 V-Strom ABS 07-16
- ...och mer.
I want to share an overview of the purchased product. These are EBC FA-229HH brake pads for the front wheel of my SuzukiGSF600SBandit motorcycle. The product is of excellent quality. They are well pro...Läs mer - Passar:
- KAWASAKI ZEPHYR1100RS 96-02 [Model]ZR1100B1/B2/B3/B5[FNO.]ZRT10A-300001-[Number of discs]Left side caliper[Application]Front
- KAWASAKI ZRX400 2 96-97 [Model]ZR400F2/F3[FNO.]ZR400E-310001-[No. of disc]Left side caliper[Application]Front
- KAWASAKI ZEPHYR400χ400 96 [Model]ZR400G1[FNO.]ZR400C-300001-[Number of discs] Left side caliper [Location]Front
- KAWASAKI ZRX400 96-97 [Model]ZR400E3[FNO.]ZR400E-020001-[No. of disc]Left side caliper[Application]Front
- KAWASAKI NINJA400R 11-13 [Model]EX400CBF/CCF/CDF[FNO.]ER400B-A00075-[Number of disc]Left side caliper[Use point]Front
- ...och mer.
Since I use it with the Touring Main, the effect is the same as the NORMAL.There is a lot of brake dust on the wheel and cowl after a day of running. It's not a high-pitched squeal, but it may be a bi...Läs mer - Passar:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...och mer.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in caseLäs mer
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING